********************* Managing Nodes ********************* Resource Discovery =================== As part of the Robin Platform installation process, resource discovery is run on the node wherein which details about the physical configuration, hardware limits and resource availability are discovered. The purpose of this is two fold. First this process allows Robin to gain a better understanding of the machine in terms of both the compute and storage resources it can provide for application deployment as well as allow Robin to better optimize the nodes usage within the cluster. Moreover it allows Robin to reserve resources that were already in-use pre-Robin installation so as to make sure resources aren't diverted inappropriately. The following properties of the node are discovered: - Disks - CPUs - Random Access Memory (RAM) - Network Devices - NUMA Configuration Details on what is captured with regards to each one of the above aspects alongside how they are captured are described below. ================== Disk Discovery ================== Robin leverages a multitude of sources to discover the disks that are available to a node. Some of the commands and directories used to attain the below details are: ``lsblk``, ``partprobe``, ``pvs``, ``blkid`` and ``/proc/mounts``. The following details are captured for each disk (if present): - Devpath - Capacity - Physical Sector size - WWN (along with make and model) - Media type This discovery is primarily performed in order determine the storage capacity of the node and consequently the amount of storage resources the host can provide to its assigned resource pool. However not all discovered disks are considered to be viable to be used as storage. Those that are excluded are primarily considered to be root devices. Moreover we do not consider devices that have parititions, file mounts or are LVMs as devices to be used for storage. This is due to the fact that when a storage role is assigned to a host Robin formats devices marked for storage. ================================ Disk Partitions (LVM) Discovery ================================ Environments where resources are constrained, such as Edge servers, may not have dedicated data disks for Robin to consume and instead may only contain disks which are partitioned. By default, partitioned disks are discovered and marked as ``Reserved`` to avoid any user data being overwritten. As a result, in order for the partition(s) to serve as data disks they will have to be setup manually by the process described below. First ensure the target partitions are discovered appropriately by Robin by running the following commands: .. code-block:: text # lsblk sdb 8:16 0 50G 0 disk ├─sdb1 8:17 0 10G 0 part └─sdb2 8:18 0 40G 0 part └─vg-robinds 253:0 0 39G 0 lvm # robin drive list --role=all ID | WWN                                                  | Host         | Path /dev/disk/by-id                                                         | Size(GB) | Movable | Type | Free/Max(GB) | Vols | Role     | Status  | LastOpr ---+------------------------------------------------------+--------------+------------------------------------------------------------------------------+----------+---------+------+--------------+------+----------+---------+--------- -  | 0xQEMU_QEMU_HARDDISK_561637eb-07d0-4a0d-8            | vnode-89-142 | scsi-0QEMU_QEMU_HARDDISK_561637eb-07d0-4a0d-8                                | 50       | N       | HDD  | 38/38 (100%) | 0/10 | RootDisk | UNKNOWN | INIT -  | 0xQEMU_QEMU_HARDDISK_561637eb-07d0-4a0d-8-vg-robinds | vnode-89-142 | dm-uuid-LVM-DOy7w9WSdGi2PcSERuceOHkfM7dotzr7nm5EuoAWsyAHkvbYGT02MaeWDro05F3R | 39       | N       | HDD  | 30/30 (100%) | 0/10 | Reserved | UNKNOWN | INIT .. Note:: Details on the ``robin drive list`` command can be found `here `__. In order to mark the partition as ready to be used as storage and confirm that its role has been updated in accordance, run the following command: .. code-block:: text # robin drive update 0xQEMU_QEMU_HARDDISK_561637eb-07d0-4a0d-8-vg-robinds --role storage --wait Job: 5922 Name: DiskModify State: PROCESSED Error: 0 Job: 5922 Name: DiskModify State: COMPLETED Error: 0 # robin drive list ID | WWN | Host | Path /dev/disk/by-id | Size(GB) | Movable | Type | Free/Max(GB) | Vols | Role | Status | LastOpr ---+------------------------------------------------------+--------------+------------------------------------------------------------------------------+----------+---------+------+--------------+------+----------+---------+--------- - | 0xQEMU_QEMU_HARDDISK_561637eb-07d0-4a0d-8-vg-robinds | vnode-89-142 | dm-uuid-LVM-DOy7w9WSdGi2PcSERuceOHkfM7dotzr7nm5EuoAWsyAHkvbYGT02MaeWDro05F3R | 39 | N | HDD | 30/30 (100%) | 0/10 | Storage | UNKNOWN | INIT .. Note:: Details on the ``robin drive update`` command can be found `here `__. Lastly to intialize the paritition and confirm that is ready for use, retrieve the name of the host it is currently associated with and run the following commands: .. code-block:: text # robin host add-role vnode-89-142 storage --wait Job: 5923 Name: HostAddRoles State: PROCESSED Error: 0 Job: 5923 Name: HostAddRoles State: WAITING Error: 0 Job: 5923 Name: HostAddRoles State: COMPLETED Error: 0 # robin drive list ID | WWN | Host | Path /dev/disk/by-id | Size(GB) | Movable | Type | Free/Max(GB) | Vols | Role | Status | LastOpr ---+------------------------------------------------------+--------------+------------------------------------------------------------------------------+----------+---------+------+--------------+------+----------+---------+--------- 4 | 0xQEMU_QEMU_HARDDISK_561637eb-07d0-4a0d-8-vg-robinds | vnode-89-142 | dm-uuid-LVM-DOy7w9WSdGi2PcSERuceOHkfM7dotzr7nm5EuoAWsyAHkvbYGT02MaeWDro05F3R | 39 | N | HDD | 30/30 (100%) | 0/10 | Storage | ONLINE | READY .. Note:: Details on the ``robin host add-role`` command can be found `here `__. ================ CPU Discovery ================ Robin leverages the information stored within the ``/proc/cpuinfo`` file in order to discover the CPUs present on a machine. The following details are captured for each CPU (if they are present): - CPU Index - Physical ID - Vendor ID - CPU Clock Speed - Model Name - Cache Size - Core ID In addition to the above, Robin discovers if a processor is online, and the min/max frequencies it can operate at by utilizing the values stored in the ``cpufrequency`` directory. The reason behind this extensive detail gathering is to enable resource tracking via identification for chargeback purposes and resource accounting whilst planning application deployment. Moreover if there are any isolated CPUs present on the system, Robin will distinguish them from the general CPUs. This is because Robin will only utilize isolated cores, if present, for application deployment due to the increased performance that can be achieved with isolation and CPU pinning. As a result, from Robin's perspective the host will only have these isolated cores to contribute to the resource pool. ================ Memory Discovery ================ Robin leverages the information stored within the ``/proc/meminfo`` file in order to discover the overall memory statistics of the host as well as certain breakdowns. The following details are captured (if they are present): - Total memory available on the host - Total number of 2M (2048 KB) Hugepages - Total size of 2M (2048 KB) Hugepages - Total number of 1G (1024 MB) Hugepages - Total size of 1G (1024 MB) Hugepages - Breakdown of memory banks including their size, speed, manufacturer and type Once again the reason behind this extensive detail gathering is to enable resource tracking via identification for chargeback purposes and resource accounting whilst planning application deployment. Moreover these details are necessary to determine how much memory to reserve for use by Robin services and to account for the memory that is already being used by non-Robin services. The latter is especially important as memory is not an overprovisionable resource. ================================== Network Device Discovery ================================== Robin leverages the information stored within the ``/sys/class/net`` directory in order to discover properties about the physical interfaces present on the node. The following details are captured for each NIC (if they are present): - Name of the NIC - Maximum Transmission Unit - MAC address - Product ID - Vendor ID - Attached CPUs - Domain, bus and slot configuration - The NUMA node to which it is attached if applicable - The number of Virtual Functions present (for SR-IOV NICs) - IP Addresses - IPv4/v6 Gateways The reason behind this extensive detail gathering is to enable appropriate IP allocation/tracking when deploying pods and ensuring network connectivity between instantiated containers. In addition the details help to validate, plan and orchestrate certain application deployment configurations. ================================== NUMA Configuration Discovery ================================== Robin leverages the information stored within the ``/sys/devices/system/node*`` directories in order to discover properties and resource limits of each NUMA node present on the host. The following details are captured for each NUMA node (if they are present): - NUMA Node ID - Total memory available - Total size of 1G (1024 MB) Hugepages - Total size of 2M (2048 KB) Hugepages - Associated General CPU IDs - Associated Isolated CPU IDs - Number of allocations present on each associated CPU ID The reason behind this extensive detail gathering is to ensure that whilst application deployment planning we do not over allocate resources or incorrectly track the used/available resources. This is especially true given the fact that Robin attempts to make every application as NUMA aware as possible in order to boost performance and optimize workloads. As with CPU discovery, if any isolated CPUs are attached to the NUMA node they will be the only processors tracked for the node. Moreover given all the above is captured alongside details of any SR-IOV Nics attached to particular NUMA node, Robin has the capability to deploy applications completely enclosed within the NUMA boundary if specified as condition during application deployment. .. Note:: The aforementioned isolated CPUs can be achieved by manually editing the ``isolcpus`` within the GRUB configuration for the host which results in the kernel scheduler never utilizing the CPU's specified. Robin Node Roles =================== There are three Robin roles that can be assigned to hosts: Manager, Compute and Storage. Depending on the resources present on a node you can initialize it to have one or more of these roles. This allows for a more granular control over what resources a node can provide for allocation. Below is a description for each role: - The Manager role should be designated to a node which is intended to be part of the Robin Control Plane. The first node which is added as a Manager will be considered the master and have essential Robin services, including the RCM server, file server and event server, running on it. As a result, it will essentially control and manage (hence the name of the role) the agent nodes. This entails handling all external communication with Robin via APIs, maintaining the most current replica of the PostgreSQL database etc. However if a failover occurs, these services are moved and run on the newly elected master. For every Robin cluster there is a maximum of 3 Manager nodes (this is necessary for HA installations). - The Compute role should be designated to a node which is intended to host pods and their respective containers. As a result, these nodes will have resources such as memory and CPU utilized by application deployments. When orchestrating applications the Robin server will try to provision pods on nodes with this roles, and track the aforementioned resource allocations/availability. - The Storage role should be designated to a node which is intended to provide storage, as indicated by its name, for applications deployed on Robin. As a result, any volumes needed for deployed applications will be created and mounted on devices on nodes with this role set. The aforementioned roles are not mutually exclusive to one another. As a result, a node could have any combination of the three roles (including all of them at one time). However a host within Robin cluster must always have role assigned to it unless it is to be decommissioned. The following commands are described in this section: =============================== ================================================================================= ``robin host add-role`` Add one or more role(s) to a host ``robin host enable-role`` Move one or more role(s) out of maintenance mode for a host ``robin host disable-role`` Move one or more role(s) into of maintenance mode for a host ``robin host remove-role`` Remove one or more role(s) from a host =============================== ================================================================================= ================== Adding role(s) ================== .. tabs:: .. tab:: CLI To add a role to a host that is already registered within the Robin cluster, issue the following command: .. code-block:: text # robin host add-role [] [] --rpool --disks ====================== ============================================================================================== ``hosts`` Comma separated list of hosts to add role to. ``roles`` Comma separated list of roles. Valid values are 'storage', 'compute', and 'manager' ``--rpool`` Assign a resource pool prior to adding a role. ``--disks`` Comma separated list of disk WWNs to add as part of storage role addition. ====================== ============================================================================================== **Example:** .. code-block:: text # robin host add-role centos-60-212,centos-60-214 Compute,Storage --wait Job: 18 Name: HostAddRoles State: VALIDATED Error: 0 Job: 18 Name: HostAddRoles State: WAITING Error: 0 Job: 18 Name: HostAddRoles State: COMPLETED Error: 0 .. tab:: API Adds a role to a host that is already registered within the Robin cluster. **End Point:** /api/v3/robin_server/hosts/ **Method:** PUT **URL Parameters:** None **Data Parameters:** - ``action: add_roles`` - This mandatory field within the payload specifies that the add role operation is to be performed. - ``roles: `` - This mandatory field within the payload is a list of roles that should be added to the specified host. Valid values include 'storage', 'compute', and 'manager'. - ``drives: `` - Utilizing this parameter by specifiying a list of WWNs of drives results in the disks associated with the aforementioned WWNs being added alongside the addition of the storage role. - ``rpool: `` - Utilizing this parameter by specifying a resource pool name results in a resource pool being assigned to the host prior to the addition of roles. **Port:** RCM Port (default value is 29442) **Headers:** - ``Authorization: `` : Authorization token to identify which user is sending the request. The token can be acquired from the login API. **Success Response Code:** 202 **Error Response Code:** 500 (Internal Server Error), 404 (Not Found Error), 401 (Unauthorized Error), 400 (Invalid API Usage Error) **Example Response:** .. raw:: html
Output .. code-block:: text { "jobid":20 } .. raw:: html
================== Enabling role(s) ================== .. tabs:: .. tab:: CLI To move a role, which is already added to a host, out of maintenance mode and thus enable it for use again, issue the following command: .. code-block:: text # robin host enable-role [] [] ====================== ============================================================================================== ``hosts`` Fully qualified hostname ``roles`` Comma separated list of roles to enable. Valid values are 'storage' and 'compute' ====================== ============================================================================================== **Example:** .. code-block:: text # robin host enable-role centos-60-212.robinsystems.com Compute Role(s) 'Compute' enabled on host centos-60-212.robinsystems.com .. tab:: API Enables a role that was previously disabled on a host. **End Point:** /api/v3/robin_server/hosts/ **Method:** PUT **URL Parameters:** None **Data Parameters:** - ``action: enable-role`` - This mandatory field within the payload specifies that the enable role operation is to be performed. - ``roles: `` - This mandatory field within the payload is a list of roles that should be enabled on the specified host. Valid values include 'compute' and 'storage'. **Port:** RCM Port (default value is 29442) **Headers:** - ``Authorization: `` : Authorization token to identify which user is sending the request. The token can be acquired from the login API. **Success Response Code:** 200 **Error Response Code:** 500 (Internal Server Error), 404 (Not Found Error), 401 (Unauthorized Error), 400 (Invalid API Usage Error) **Example Response:** On success the reponse is empty. ================== Disabling role(s) ================== .. tabs:: .. tab:: CLI Within Robin when one disables a role, the role is said to be put into maintenance mode. This in turn means that for all intents and purposes the host does not have access to this role. This is useful for debugging purposes and to temporarily reserve the hosts resources. To move a role into maintenance mode and thus disable it for use, issue the following command: .. code-block:: text # robin host disable-role [] [] ====================== ============================================================================================== ``hosts`` Fully qualified hostname ``roles`` Comma separated list of roles to enable. Valid values are 'storage' and 'compute' ====================== ============================================================================================== **Example:** .. code-block:: text # robin host disable-role centos-60-212.robinsystems.com Compute Role(s) 'Compute' disabled on host centos-60-212.robinsystems.com .. tab:: API Disables a role for a host such that the host temporarily does not have access to it. **End Point:** /api/v3/robin_server/hosts/ **Method:** PUT **URL Parameters:** None **Data Parameters:** - ``action: disable-role`` - This mandatory field within the payload specifies that the disable role operation is to be performed. - ``roles: `` - This mandatory field within the payload is a list of roles that should be disabled on the specified host. Valid values include 'compute' and 'storage'. **Port:** RCM Port (default value is 29442) **Headers:** - ``Authorization: `` : Authorization token to identify which user is sending the request. The token can be acquired from the login API. **Success Response Code:** 200 **Error Response Code:** 500 (Internal Server Error), 404 (Not Found Error), 401 (Unauthorized Error), 400 (Invalid API Usage Error) **Example Response:** On success the reponse is empty. ================== Removing role(s) ================== .. tabs:: .. tab:: CLI In order to a remove a role that had previously been assigned to a node, issue the following command: .. code-block:: text # robin host remove-role [] [] --force --yes ====================== ============================================================================================== ``hosts`` Comma separated list of hosts to remove role from. ``roles`` Comma separated list of roles. Valid values are 'storage', 'compute', and 'manager' ``--force`` Required if retrying a remove-role operation. ``--yes`` Do not prompt the user for confirmation of removal ====================== ============================================================================================== **Example:** .. code-block:: text # robin host remove-role centos-60-212 Compute,Storage --wait Job: 192 Name: HostRemoveRoles State: VALIDATED Error: 0 Job: 192 Name: HostRemoveRoles State: WAITING Error: 0 Job: 192 Name: HostRemoveRoles State: COMPLETED Error: 0 .. tab:: API Removes a role that had previously been assigned to a host. **End Point:** /api/v3/robin_server/hosts/ **Method:** PUT **URL Parameters:** None **Data Parameters:** - ``action: remove_roles`` - This mandatory field within the payload specifies that the remove role operation is to be performed. - ``roles: `` - This mandatory field within the payload is a list of roles that should be removed from the specified host. Valid values include 'storage', 'compute', and 'manager'. - ``force: true`` - This field is mandatory when retrying the role removal operation, otherwise it can be excluded. **Port:** RCM Port (default value is 29442) **Headers:** - ``Authorization: `` : Authorization token to identify which user is sending the request. The token can be acquired from the login API. **Success Response Code:** 202 **Error Response Code:** 500 (Internal Server Error), 404 (Not Found Error), 401 (Unauthorized Error), 400 (Invalid API Usage Error) **Example Response:** .. raw:: html
Output .. code-block:: text { "jobid":24 } .. raw:: html
============================================================== Shutting Down, Rebooting or Power cycling a manager node ============================================================== In a Robin HA cluster, there are three manager nodes. One node will have the master role whilst the others will have slave roles. Before a manager node is brought down via a shutdown, reboot or power cycle, make sure that all three manager nodes are **ONLINE** and **Ready**. This will ensure there are two healthy managers remaining when the target node goes offline. .. Note:: A minimum of two Manager nodes are required to address split-brain failure scenarios. If the manager node that is to be taken offline is the current master, or a transition of roles is desired, then the master lock must be released before the operation can proceed. The release of the lock results in one of the slave manager nodes acquiring it and consequently transitioning into being the node with the master role. Run the following command to force the manager node with the master role to release the master lock: .. code-block:: text # robin host release-master-lock –-force When the above command is run, the current master manager node stops all control plane services whilst also releasing the lock. Once this is done, the current master manager node then puts itself to sleep and waits for one of the slaves to acquire the master lock in order to transition into become the new master manager node. Once the transition is complete, the previous master manager node takes on the slave role and follows the new master manager node. .. Note:: After releasing the master lock, make sure all three Managers are **ONLINE** and **Ready** state, before you shut down, reboot, or power cycle any of the nodes. Managing Resource Pools ======================== Resource pools are a construct in Robin which allow you to group nodes in the cluster together for allocation purposes and consequently provide resource isolation. In turn this isolation has a multi-layered impact; primarily it determines what resources a tenant (and its associated users) has access to, which in turn affects the type of applications that can be deployed. As a result, resource pools can provide isolation at a user level as well as an application level since workloads can be manipulated such that they are deployed on a particular set of nodes. This is useful when one needs performant applications to run on more powerful or specifically configured nodes for example. The flip side of this is also true as nodes can be cordoned off from application deployments. The aforementioned isolation is maintained by the fact each node can be only be part of a single resource pool. Upon installation, Robin creates a resource pool called ``default``, which has no nodes associated with it and is attached to the Adminstrator's tenant, for convienence sake. .. Note:: Nodes need to be added to resource pools before they can be initialized via roles and once they are added to a resource pool they cannot be removed. The following commands are described in this section: =============================== ================================================================================= ``robin rpool add`` Add a resource pool ``robin rpool list`` List all resource pools ``robin rpool remove`` Delete a resource pool ``robin host assign-rpool`` Assign a resource pool to one or more hosts =============================== ================================================================================= ====================== Adding a resource pool ====================== .. tabs:: .. tab:: CLI In order to create an empty resource pool, issue the following the command: .. code-block:: text # robin rpool add [] --zone --tenant --desc ========================== ============================================================================================== ``name`` Resource pool name ``--zone `` Name of zone the resource pool belongs to ``--tenant `` Name of tenant the resource pool should be assigned to ``--desc `` Description for resource pool ========================== ============================================================================================== **Example:** .. code-block:: text # robin rpool add demo --desc "Resource pool for demo" --tenant Administrators Added resource pool demo. .. tab:: API Creates an empty resource pool. **End Point:** /api/v3/robin_server/rpools **Method:** POST **URL Parameters:** None **Data Parameters:** - ``name: `` - This mandatory field within the payload specifies the name of the resource pool to be created. - ``description: `` - This mandatory field within the payload specifies the description of the resource pool to be created. - ``zone: `` - This mandatory field within the payload specifies the name of the zone in which the resource pool should be created. - ``tenant: `` - Utilizing this parameter within the payload, by specifying a tenant name, results in the consequent resource pool being associated with the aforementioned tenant. **Port:** RCM Port (default value is 29442) **Headers:** - ``Authorization: `` : Authorization token to identify which user is sending the request. The token can be acquired from the login API. **Success Response Code:** 200 **Error Response Code:** 500 (Internal Server Error), 404 (Not Found Error), 401 (Unauthorized Error), 400 (Invalid API Usage Error), 409 (Duplicate Resource Error) **Example Response:** .. raw:: html
Output .. code-block:: text { "message":"Added resource pool demo.\n" } .. raw:: html
=========================== Listing all resource pools =========================== .. tabs:: .. tab:: CLI In order to list all resource pools currently present on the cluster along with details off their states, number of applications etc, issue the following command: .. code-block:: text # robin rpool list [] --full --json ====================== ============================================================================================== ``name`` Resource pool name to filter by. Note this is an optional argument ``--full`` Display additional information about each resource pool ``--json`` Output in JSON ====================== ============================================================================================== **Example:** .. code-block:: text # robin rpool list ID | Name | %cores | %mem | Nodes-ON/OF/FA | Apps-ON/OF/FA/AW/OT | Description ---+---------+--------+--------+----------------+---------------------+------------------------ 1 | default | 20/100 | 20/100 | 3- 3/ 0/ 0 | 4- 4/ 0/ 0/ 0/ 0 | Default Resource Pool 2 | demo | 20/100 | 20/100 | 0- 0/ 0/ 0 | 0- 0/ 0/ 0/ 0/ 0 | Resource pool for demo (ON: Online, OF: Offline, FA: Faulted, AW: Admin Wait, OT: Other states .. tab:: API Returns information on all resource pools currently present on the cluster along with details off their states, number of applications etc. **End Point:** /api/v3/robin_server/rpools **Method:** GET **URL Parameters:** None **Data Parameters:** None **Port:** RCM Port (default value is 29442) **Headers:** - ``Authorization: `` : Authorization token to identify which user is sending the request. The token can be acquired from the login API. **Success Response Code:** 200 **Error Response Code:** 500 (Internal Server Error) **Example Response:** .. raw:: html
Output .. code-block:: text { "items":[ { "zoneid":1597147518, "hdd_size":429496729600, "apps":[ { "name":"demo", "state":6 } ], "id":1, "name":"default", "ssd_size":0, "num_cores":80, "nodes":[ { "zoneid":1597147518, "k8s_node_status":"Ready", "name":"cscale-82-140", "remove_taint":true, "state":"ONLINE", "status":"Ready", "hostname":"cscale-82-140.robinsystems.com", "nodeid":1, "roles":[ [ "MANAGER", "ONLINE", "READY" ], [ "STORAGE", "ONLINE", "READY" ], [ "COMPUTE", "ONLINE", "READY" ] ] }, { "zoneid":1597147518, "k8s_node_status":"Notready", "name":"cscale-82-139", "remove_taint":false, "state":"UNREACHABLE", "status":"Notready", "hostname":"cscale-82-139.robinsystems.com", "nodeid":2, "roles":[ [ "STORAGE", "OFFLINE", "NOTREADY" ], [ "COMPUTE", "OFFLINE", "NOTREADY" ] ] } ], "hdd_used_size":73000000000.0, "num_nodes":2, "ssd_used_size":0, "mem_size":67111419904, "description":"Default Resource Pool" } ] } .. raw:: html
========================= Removing a resource pool ========================= .. tabs:: .. tab:: CLI In order to remove a resource pool from Robin, issue the following command: .. Note:: Only empty resource pools which are not attached to any tenants can be removed. .. code-block:: text # robin rpool remove [] --yes ====================== ============================================================================================== ``name`` Resource pool name to remove ``--yes`` Do not prompt the user for confirmation of removal ====================== ============================================================================================== **Example:** .. code-block:: text # robin rpool remove demo Deleted resource pool 'demo'. .. tab:: API Removes a resource pool from Robin. **End Point:** /api/v3/robin_server/rpools/ **Method:** DELETE **URL Parameters:** None **Data Parameters:** None **Port:** RCM Port (default value is 29442) **Headers:** - ``Authorization: `` : Authorization token to identify which user is sending the request. The token can be acquired from the login API. **Success Response Code:** 200 **Error Response Code:** 500 (Internal Server Error), 404 (Not Found Error), 401 (Unauthorized Error), 400 (Invalid API Usage Error) **Example Response:** .. raw:: html
Output .. code-block:: text { "message":"Deleted resource pool demo.\n" } .. raw:: html
=================================== Assigning a resource pool to a host =================================== .. tabs:: .. tab:: CLI When one assigns a resource pool to a host, it results in the resources attached to the host contributing to the resource pool. These resources include storage drives, CPUs and memory. In turn any application created by a user in a tenant that is associated with the resource pool will have the ability to utilize the aforementioned resources. In order to assign a resource pool to a host, issue the following command: .. code-block:: text # robin host assign-rpool [] [] ====================== ============================================================================================== ``hosts`` A single host or a comma separated list of hosts to assign a resource pool too ``rpool`` Name of resource pool to assign ====================== ============================================================================================== **Example:** .. code-block:: text # robin host assign-rpool centos-60-212.robinsystems.com demo --wait Job: 22 Name: HostAddResourcePool State: VALIDATED Error: 0 Job: 22 Name: HostAddResourcePool State: WAITING Error: 0 Job: 22 Name: HostAddResourcePool State: COMPLETED Error: 0 .. tab:: API Assigns a resource pool to a host, such that the resources such as storage drives, CPU etc. attached to the host contribute to the resource pool and are available for use by applications to be deployed within that resource pool. **End Point:** /api/v3/robin_server/hosts/ **Method:** PUT **URL Parameters:** None **Data Parameters:** - ``action: add_rpool`` - This mandatory field within the payload specifies the add resource pool action is to be performed. - ``host_rpool: `` -- - ``hostname: `` - This mandatory key value pairing within the ``host_rpool`` dictionary indicates which host the operation is to be performed on. - ``rpool: `` - This mandatory key value pairing within the ``host_rpool`` dictionary indicates which resource pool should be assigned to the aformentioned host. **Port:** RCM Port (default value is 29442) **Headers:** - ``Authorization: `` : Authorization token to identify which user is sending the request. The token can be acquired from the login API. **Success Response Code:** 202 **Error Response Code:** 500 (Internal Server Error), 404 (Not Found Error), 401 (Unauthorized Error), 400 (Invalid API Usage Error) **Example Response:** .. raw:: html
Output .. code-block:: text { "jobid":109 } .. raw:: html
Managing File Collections ============================ **File collections** are repositories in a Robin cluster where application bundles and images required for the provisioning of applications are stored. **Robin File Server**, one of the core Robin management services, is responsible for managing file collections and the files they contain. Storage for each file collection is allocated from Robin managed storage. The volumes allocated for each file collection can be configured with or without replication, however it is highly recommended that replicated storage be used. This will ensure that there will not be any data loss should one of the hosts providing the storage go down or one of storage disks fail. The following commands are described in this section: =============================== ================================================================================= ``robin collection create`` Create a file collection ``robin collection delete`` Delete a file collection ``robin collection list`` List all file collections ``robin collection offline`` Disable a file collection ``robin collection online`` Enable a file collection ``robin collection move`` Move the contents of a file collection =============================== ================================================================================= =========================== Creating a file collection =========================== .. tabs:: .. tab:: CLI In order to create a file collection in order to store logs, images, bundles etc, issue the following the command: .. code-block:: text # robin collection create --collection_type --storage_type --replicas --size --force ========================================== ============================================================================================== ``media_type`` The media type of storage drives to allocate from. Options include 'HDD' or 'SSD' ``rpool`` Name of the resource pool to allocate from. ``--collection_type `` Type of collection to create. Options include 'LOG_COLLECTION' or 'FILE_COLLECTION' ``--storage_type `` Type of storage to use. Options include 'STORMGR_VOLUME', 'LOCAL', or 'STORAGE_ARRAY' ``--replicas `` Replication factor of the collection volume ``--size `` Size of allocated storage volume ``--force`` Override the requirement that the number of replicas must be set to 3 ========================================== ============================================================================================== **Example:** .. code-block:: text # robin collection create HDD default --replicas 1 --size 5G --force --wait Job: 216 Name: CollectionAdd State: PROCESSED Error: 0 Job: 216 Name: CollectionAdd State: WAITING Error: 0 Job: 216 Name: CollectionAdd State: COMPLETED Error: 0 .. tab:: API Creates a file collection in order to store logs, images, bundles etc. **End Point:** /api/v3/robin_server/collections **Method:** POST **URL Parameters:** None **Data Parameters:** - ``media: `` - This mandatory field within the payload specifies the media type of storage drives to allocate from. Options include 'HDD' or 'SSD'. - ``rpool: `` - This mandatory field within the payload specifies the resource pool name from which to allocate from. - ``collection_type: `` - This mandatory field within the payload specifies the type of collection create. Options include 'LOG_COLLECTION' or 'FILE_COLLECTION'. - ``storage_type: `` - This mandatory field within the payload specifies the type of storage to use. Options include 'STORMGR_VOLUME', 'LOCAL', or 'STORAGE_ARRAY'. - ``replicas: `` - This mandatory field within the payload specifies the replication factor of the collection volume. Valid values include: 1, 2, and 3. - ``size: `` - Utilizing this parameter, by specifying the size of the collection volume in bytes, results in a volume of the aforementioned size being created. The default size is 50GB. - ``force: true`` - Utilizing this parameter allows one to override the requirment that the number of replicas for a collection value must be 3. **Port:** RCM Port (default value is 29442) **Headers:** - ``Authorization: `` : Authorization token to identify which user is sending the request. The token can be acquired from the login API. **Success Response Code:** 202 **Error Response Code:** 500 (Internal Server Error), 404 (Not Found Error), 401 (Unauthorized Error), 400 (Invalid API Usage Error) **Example Response:** .. raw:: html
Output .. code-block:: text { "plan":{ "collection_type":"FILE_COLLECTION", "storage":[ { "size":5368709120, "rpool":"default", "faultdomain":"host", "replication":1, "media":"HDD" } ], "storage_type":"STORMGR_VOLUME", "authorization_token":"eyJ0eXAiOiJKV1QiLCJhbGciOiJIUzI1NiJ9.eyJ0ZW5hbnRfaWQiOjEsInVzZXJfaWQiOjMsImV4cCI6MTYwMDIyMjY5NH0.qsv3pBCXAfGnS1JrhvncQiubEqQcyPhV2fzGse8aA-A", "hostname":"vnode-95-42.robinsystems.com", "collection_id":1600138723311, "force":true, "collection_name":"file-collection-1600138723311" }, "jobid":48 } .. raw:: html
=========================== Deleting a file collection =========================== .. tabs:: .. tab:: CLI In order to delete a file collection, issue the following the command: .. code-block:: text # robin collection delete --force --yes ======================== ============================================================================================== ``collection_id`` The media type of storage drives to allocate from. Options include HDD or SSD ``--force`` Delete a collection forcibly if the backing storage is down ``--yes`` Do not prompt the user for confirmation of deletion ======================== ============================================================================================== **Example:** .. code-block:: text # robin collection delete 1583820760654 --yes --wait Job: 221 Name: CollectionDelete State: VALIDATED Error: 0 Job: 221 Name: CollectionDelete State: COMPLETED Error: 0 .. tab:: API Deletes a file collection. **End Point:** /api/v3/robin_server/collections **Method:** DELETE **URL Parameters:** None **Data Parameters:** - ``collection_id: `` - This mandatory field within the payload specifies the ID of the collection that should be deleted. - ``force: true`` - Utilizing this parameter results in the collection being forcibly removed if the backing storage is down. **Port:** RCM Port (default value is 29442) **Headers:** - ``Authorization: `` : Authorization token to identify which user is sending the request. The token can be acquired from the login API. **Success Response Code:** 202 **Error Response Code:** 500 (Internal Server Error), 404 (Not Found Error), 401 (Unauthorized Error), 400 (Invalid API Usage Error) **Example Response:** .. raw:: html
Output .. code-block:: text { "jobid":81, "plan":{ "collection_id":1597897988633, "authorization_token":"eyJ0eXAiOiJKV1QiLCJhbGciOiJIUzI1NiJ9.eyJ1c2VyX2lkIjozLCJ0ZW5hbnRfaWQiOjEsImV4cCI6MTU5Nzk2NzM1M30.Tcv6pAb66lC2k0VJpLj4oRT1elK99Qi7WBv_7Iid_zo" } } .. raw:: html
============================= Listing all file collections ============================= .. tabs:: .. tab:: CLI In order to view all file collections available on the cluster alongside details such the host it is mounted on, its size, replication factor etc, issue the following command: .. code-block:: text # robin collection list --name --full --json ======================== ============================================================================================== ``--name `` File collection name to filter by ``--full`` Display additional information about each file collection ``--json`` Output in JSON ======================== ============================================================================================== **Example:** .. code-block:: text # robin collection list Collection Id | Collection Type | Storage Type | Name | Hostname | Status | LastOpr | Used | Size (GB) | Replication Factor --------------+-----------------+----------------+-------------------------------+--------------------------+--------+---------+-------+-----------+-------------------- 1583356117884 | FILE_COLLECTION | STORMGR_VOLUME | file-collection-1583356117884 | vnode36.robinsystems.com | READY | Online | 1.3M | 10 | 1 1583820760654 | FILE_COLLECTION | STORMGR_VOLUME | file-collection-1583820760654 | vnode36.robinsystems.com | READY | Online | 2.2M | 5 | 1 .. tab:: API Returns information on all file collections available on the cluster alongside details such the host it is mounted on, its size, replication factor etc. **End Point:** /api/v3/robin_server/collections **Method:** GET **URL Parameters:** - ``name=`` : Utilizing this parameter results in only information for the file collection with the specified name being returned. **Data Parameters:** None **Port:** RCM Port (default value is 29442) **Headers:** - ``Authorization: `` : Authorization token to identify which user is sending the request. The token can be acquired from the login API. **Success Response Code:** 200 **Error Response Code:** 500 (Internal Server Error) **Example Response:** .. raw:: html
Output .. code-block:: text { "collections":[ { "notifications":{ }, "size":5368709120, "id":1, "used":"1.3M", "name":"file-collection-1597122699552", "pathname":"\/usr\/local\/robin\/collections\/file-collection-1597122699552", "state":"Online", "status":"READY", "timestamp":"August 10, 2020 22:11:39", "collection_type":"FILE_COLLECTION", "replication":1, "storage_type":"STORMGR_VOLUME", "hostname":"cscale-82-140.robinsystems.com", "collection_id":1597122699552 } ] } .. raw:: html
============================= Disabling a file collection ============================= .. tabs:: .. tab:: CLI In order to disable a file collection such that it temporarily cannot be used/accessed, issue the following command: .. code-block:: text # robin collection offline ======================== ============================================================================================== ``collection_id`` File collection to disable ======================== ============================================================================================== **Example:** .. code-block:: text # robin collection offline 1583820760654 --wait Job: 218 Name: CollectionOffline State: PROCESSED Error: 0 Job: 218 Name: CollectionOffline State: COMPLETED Error: 0 # robin collection list Collection Id | Collection Type | Storage Type | Name | Hostname | Status | LastOpr | Size (GB) | Replication Factor --------------+-----------------+----------------+-------------------------------+--------------------------+-----------+---------+-----------+-------------------- 1583356117884 | FILE_COLLECTION | STORMGR_VOLUME | file-collection-1583356117884 | vnode36.robinsystems.com | READY | Online | 10 | 1 1583820760654 | FILE_COLLECTION | STORMGR_VOLUME | file-collection-1583820760654 | vnode36.robinsystems.com | NOT_READY | Offline | 5 | 1 .. tab:: API Disable a file collection such that it temporarily cannot be used/accessed. **End Point:** /api/v3/robin_server/collections **Method:** PUT **URL Parameters:** None **Data Parameters:** - ``action: offline`` - This mandatory field within the payload specifies that the offline operation is to be performed. - ``collection_id: `` - This mandatory field within the payload specifies which collection should be disabled. **Port:** RCM Port (default value is 29442) **Headers:** - ``Authorization: `` : Authorization token to identify which user is sending the request. The token can be acquired from the login API. **Success Response Code:** 202 **Error Response Code:** 500 (Internal Server Error), 404 (Not Found Error), 401 (Unauthorized Error), 400 (Invalid API Usage Error) **Example Response:** .. raw:: html
Output .. code-block:: text { "plan":{ "authorization_token":"eyJ0eXAiOiJKV1QiLCJhbGciOiJIUzI1NiJ9.eyJ0ZW5hbnRfaWQiOjEsInVzZXJfaWQiOjMsImV4cCI6MTU5Nzc2NjE1NH0._D_s9sj_6HoOQkqytCGqlgtL6aIsp1oym6BOwntM8iU", "origin":1, "collection_id":1597122699552 }, "jobid":2073 } .. raw:: html
============================= Enabling a file collection ============================= .. tabs:: .. tab:: CLI In order to enable a file collection such that it is usable again by remounting it on the master node of the cluster, issue the following command: .. code-block:: text # robin collection online ======================== ============================================================================================== ``collection_id`` File collection to enable ======================== ============================================================================================== **Example:** .. code-block:: text # robin collection online 1583820760654 --wait Job: 219 Name: CollectionOnline State: PROCESSED Error: 0 Job: 219 Name: CollectionOnline State: COMPLETED Error: 0 # robin collection list Collection Id | Collection Type | Storage Type | Name | Hostname | Status | LastOpr | Size (GB) | Replication Factor --------------+-----------------+----------------+-------------------------------+--------------------------+--------+---------+-----------+-------------------- 1583356117884 | FILE_COLLECTION | STORMGR_VOLUME | file-collection-1583356117884 | vnode36.robinsystems.com | READY | Online | 10 | 1 1583820760654 | FILE_COLLECTION | STORMGR_VOLUME | file-collection-1583820760654 | vnode36.robinsystems.com | READY | Online | 5 | 1 .. tab:: API Enables a file collection such that it can be used again by remounting it on the master node of the cluster. **End Point:** /api/v3/robin_server/collections **Method:** PUT **URL Parameters:** None **Data Parameters:** - ``action: online`` - This mandatory field within the payload specifies that the online operation is to be performed. - ``collection_id: `` - This mandatory field within the payload specifies which collection should be enabled. **Port:** RCM Port (default value is 29442) **Headers:** - ``Authorization: `` : Authorization token to identify which user is sending the request. The token can be acquired from the login API. **Success Response Code:** 202 **Error Response Code:** 500 (Internal Server Error), 404 (Not Found Error), 401 (Unauthorized Error), 400 (Invalid API Usage Error) **Example Response:** .. raw:: html
Output .. code-block:: text { "jobid":2108, "plan":{ "origin":1, "collection_id":1597122699552, "authorization_token":"eyJ0eXAiOiJKV1QiLCJhbGciOiJIUzI1NiJ9.eyJ0ZW5hbnRfaWQiOjEsInVzZXJfaWQiOjMsImV4cCI6MTU5Nzc2NjE1NH0._D_s9sj_6HoOQkqytCGqlgtL6aIsp1oym6BOwntM8iU" } } .. raw:: html
============================= Moving a file collection ============================= .. tabs:: .. tab:: CLI In order to move the resources contained within one file collection into another, issue the following command: .. code-block:: text # robin collection move ========================= ============================================================================================== ``collection_id`` ID of source file collection from which to move resources from ``target_collection_id`` ID of target file collection to move resource to ========================= ============================================================================================== **Example:** .. code-block:: text # robin collection move 1583820760654 1583356117884 --wait Job: 225 Name: CollectionMove State: PROCESSED Error: 0 Job: 225 Name: CollectionMove State: COMPLETED Error: 0 .. tab:: API Moves the resources contained within one file collection into another. **End Point:** /api/v3/robin_server/collections **Method:** PUT **URL Parameters:** None **Data Parameters:** - ``action: moveresources`` - This mandatory field within the payload specifies that the resources within the source collection should be moved. - ``collection_id: `` - This mandatory field within the payload specifies the source collection the resources should be moved from. - ``target_collection_id: `` - This mandatory field within the payload specifies the destination collection the resources should be moved to. **Port:** RCM Port (default value is 29442) **Headers:** - ``Authorization: `` : Authorization token to identify which user is sending the request. The token can be acquired from the login API. **Success Response Code:** 202 **Error Response Code:** 500 (Internal Server Error), 404 (Not Found Error), 401 (Unauthorized Error), 400 (Invalid API Usage Error) **Example Response:** .. raw:: html
Output .. code-block:: text { "jobid":47, "plan":{ "authorization_token":"eyJ0eXAiOiJKV1QiLCJhbGciOiJIUzI1NiJ9.eyJ0ZW5hbnRfaWQiOjEsInVzZXJfaWQiOjMsImV4cCI6MTYwNTI0NjA3OH0.wSV2mDr7y-kn_1MgafG7HxvjEdgu-cbTg3bSP4tQoZo", "target_collection_id":1605164780025, "origin":1, "collection_id":1605164771262 } } .. raw:: html
Gathering information on nodes =============================== Robin exposes multiple endpoints that provides a user the means by which to attain information about the hosts registered with a Robin cluster. The information that is returned is a combination of the physical attributes (obtained by the resource discovery described `here `_), resource utilization and status of services for the host. This gives a user insight into the state of the cluster alongside granular details for each individual host and enables application deployment planning. The following commands are described in this section: =============================== ================================================================================= ``robin host list`` View all hosts in a cluster ``robin host info`` Display detailed information about a host =============================== ================================================================================= =============== List all hosts =============== .. tabs:: .. tab:: CLI In order to view all hosts within a cluster alongside information on their statuses (from Robin's perspective), resource consumption, and roles within the cluster, issue the following command: .. code-block:: text # robin host list --services --resources --network --devices --tags --json ============================ ====================================================================================== ``--services`` Show status information for each host ``--resources`` Show resource utilization for each host ``--network`` Show network resource utilization info for each host ``--devices`` Show devices resource utilization info for each host ``--tags`` Show tag information for each host ``--json`` Output in JSON ============================ ====================================================================================== **Example 1 (Listing all hosts):** .. code-block:: text # robin host list Id | Hostname | Version | Status | RPool | LastOpr | Roles | Isol Cores(SHR/DED/Total) | Non-Isol Cores | GPUs | Mem(Free/Alloc/Total) | HDD(#/Alloc/Total) | SSD(#/Alloc/Total) | Pod Usage | Joined Time -------------+-------------------------------+-----------+--------+---------+---------+--------+---------------------------+----------------+------+-----------------------+--------------------+--------------------+-----------+---------------------- 1596566663:1 | cscale-82-81.robinsystems.com | 5.3.0-172 | Ready | default | ONLINE | M*,S,C | 0/0/0 | 1/40 | 0/0 | 24G/6G/31G | 1/5G/100G | -/-/- | 11/110 | 04 Aug 2020 04:44:47 1596566663:2 | cscale-82-82.robinsystems.com | 5.3.0-172 | Ready | default | ONLINE | M,S,C | 0/0/0 | 2/40 | 0/0 | 24G/7G/31G | 2/40G/200G | -/-/- | 13/110 | 04 Aug 2020 04:51:52 1596566663:3 | cscale-82-83.robinsystems.com | 5.3.0-172 | Ready | default | ONLINE | M,S,C | 0/0/0 | 1/40 | 0/0 | 24G/6G/31G | 2/-/200G | -/-/- | 11/110 | 04 Aug 2020 04:58:25 1596566663:4 | qct-07.robinsystems.com | 5.3.0-172 | Ready | workers | ONLINE | S,C | 8/68/76 | 1/4 | 0/0 | 280G/95G/376G | 1/554G/893G | -/-/- | 83/110 | 04 Aug 2020 05:05:24 1596566663:5 | qct-08.robinsystems.com | 5.3.0-172 | Ready | workers | ONLINE | S,C | 0/76/76 | 1/4 | 0/0 | 284G/91G/376G | 1/547G/893G | -/-/- | 88/110 | 04 Aug 2020 05:12:06 1596566663:6 | qct-11.robinsystems.com | 5.3.0-172 | Ready | workers | ONLINE | S,C | 0/27/76 | 1/4 | 0/0 | 147G/40G/187G | 1/581G/893G | -/-/- | 34/110 | 04 Aug 2020 05:18:47 1596566663:7 | cscale-82-80.robinsystems.com | 5.3.0-172 | Ready | workers | ONLINE | C,S | 0/21/36 | 1/40 | 0/0 | 0.7G/30G/31G | 1/-/100G | -/-/- | 28/110 | 04 Aug 2020 20:21:40 **Example 2 (Retrieving status information):** .. code-block:: text # robin host list --services +-------------------------------+-------+-------+------+-------+-------+------+-------+------+------+------+-------+------+------+-------+---------+---------+ | Host | ConCl | ConSr | GCli | Httpd | Iomgr | RMon | Pgsql | RAgt | RAer | REvt | RFile | NMon | RSer | RWdog | Metrics | Stormgr | +-------------------------------+-------+-------+------+-------+-------+------+-------+------+------+------+-------+------+------+-------+---------+---------+ | cscale-82-81.robinsystems.com | DOWN | UP | UP | UP | UP | UP | UP | UP | UP | UP | UP | UP | UP | UP | DOWN | UP | | cscale-82-82.robinsystems.com | DOWN | UP | UP | UP | UP | UP | UP | UP | DOWN | DOWN | DOWN | DOWN | DOWN | UP | DOWN | DOWN | | cscale-82-83.robinsystems.com | DOWN | UP | UP | UP | UP | UP | UP | UP | DOWN | DOWN | DOWN | DOWN | DOWN | UP | DOWN | DOWN | | qct-07.robinsystems.com | UP | DOWN | UP | UP | UP | UP | DOWN | UP | DOWN | DOWN | DOWN | DOWN | DOWN | DOWN | DOWN | DOWN | | qct-08.robinsystems.com | UP | DOWN | UP | UP | UP | UP | DOWN | UP | DOWN | DOWN | DOWN | DOWN | DOWN | DOWN | DOWN | DOWN | | qct-11.robinsystems.com | UP | DOWN | UP | UP | UP | UP | DOWN | UP | DOWN | DOWN | DOWN | DOWN | DOWN | DOWN | DOWN | DOWN | | cscale-82-80.robinsystems.com | UP | DOWN | UP | UP | UP | UP | DOWN | UP | DOWN | DOWN | DOWN | DOWN | DOWN | DOWN | DOWN | DOWN | +-------------------------------+-------+-------+------+-------+-------+------+-------+------+------+------+-------+------+------+-------+---------+---------+ UP: Running CRIT: Critical and Down DOWN: Not Running .. tab:: API Returns information on all hosts within a cluster including details on their statuses (from Robin's perspective), resource consumption, and roles within the cluster. **End Point:** /api/v5/robin_server/hosts **Method:** GET **URL Parameters:** - ``details=tags`` : Utilizing this parameter results in tag information for each host being present in the response payload. **Data Parameters:** None **Port:** RCM Port (default value is 29442) **Headers:** - ``Authorization: `` : Authorization token to identify which user is sending the request. The token can be acquired from the login API. **Success Response Code:** 200 **Error Response Code:** 500 (Internal Server Error) **Example Response:** .. raw:: html
Output .. code-block:: text { "page_num":1, "page_size":3, "total":3, "num_items":3, "nodes_count":3, "items":[ { "id":3, "zoneid":1664284022, "state":"ONLINE", "gpu_cores":0, "cpu_cores":40, "maintenance_mode":"DISABLED", "memory":270079143936, "name":"poch03", "sysinfo":{ "distribution":"rocky", "system":"Linux", "release":"4.18.0-372.9.1.el8.x86_64", "version":"#1 SMP Tue May 10 14:48:47 UTC 2022", "processor":"x86_64", "boot_time":1664310097, "install_date":"Tue May 10 14:48:47 UTC 2022", "iqn":"iqn.1994-05.com.redhat:6c454716a37", "wwpns":[ ], "robin_software":[ { "version":"5.4.1", "release":"25", "patch":"", "patch_date":"", "full_version":"5.4.1-25", "build_info":"robin-defd5ab9adce8fdfb7df57d6cbb50c28742deeb2:robin-ui:c45019c5e0e0dc0a6df2e28f5fa9d8b59ab5abb4:robingraph:6cc6485a7ffa817926962c683730d007b33636cc", "install_date":"2022-09-26" } ], "uuid":"", "current_version":"5.4.1-25", "join_time":1664259055 }, "hostname":"poch03.robinsystems.com", "public_hostname":"poch03.robinsystems.com", "mem_for_storage":21143632852, "rpool":"default", "services":{ "iomgr-server":{ "ActiveState":"active" }, "consul-client":{ "ActiveState":"active" }, "robin-agent":{ "ActiveState":"active" }, "monitor-server":{ "ActiveState":"active" }, "consul_dns":true }, "memory_allocated":0, "cpu_cores_allocated":0, "gpu_cores_allocated":0, "memory_reserved":25438600148, "ninstances":11, "disks":[ { "node_ref":3, "wwn":"0x5002538c4006a2f8", "role":"Storage", "type":"SSD", "state":"READY", "capacity":960197124096, "pfree":936873295872, "maintenance_mode":"DISABLED", "make":"Samsung based SSDs", "zoneid":1664284022, "devpath":"\/dev\/disk\/by-id\/ata-SAMSUNG_MZ7KM960HAHP-00005_S2HTNXAG905537", "model":"SAMSUNG MZ7KM960HAHP-00005", "alloc_slices":0, "spf":0.8, "dev":"\/dev\/sdi", "protected":0, "reattachable":0, "max_volumes_per_disk":40, "max_latency_sensitive_vols_per_disk":2, "max_throughput_intensive_vols_per_disk":1, "pused":0, "allocated":0, "max_alloc_slices":693, "free_alloc_slices":693, "status":"ONLINE" }, { "node_ref":3, "wwn":"0x5002538c4006a9d0", "role":"RootDisk", "type":"SSD", "state":"INIT", "capacity":960197124096, "pfree":0, "maintenance_mode":"DISABLED", "make":"Samsung based SSDs", "zoneid":1664284022, "devpath":"\/dev\/disk\/by-id\/ata-SAMSUNG_MZ7KM960HAHP-00005_S2HTNXAG905999", "model":"SAMSUNG MZ7KM960HAHP-00005", "alloc_slices":0, "spf":0.8, "dev":"\/dev\/sdc", "protected":0, "reattachable":0, "max_volumes_per_disk":40, "max_latency_sensitive_vols_per_disk":2, "max_throughput_intensive_vols_per_disk":1, "pused":0, "allocated":0, "max_alloc_slices":693, "free_alloc_slices":693, "status":"UNKNOWN" }, { "node_ref":3, "wwn":"0x5002538c4006a9d1", "role":"Storage", "type":"SSD", "state":"READY", "capacity":960197124096, "pfree":936873295872, "maintenance_mode":"DISABLED", "make":"Samsung based SSDs", "zoneid":1664284022, "devpath":"\/dev\/disk\/by-id\/ata-SAMSUNG_MZ7KM960HAHP-00005_S2HTNXAG906000", "model":"SAMSUNG MZ7KM960HAHP-00005", "alloc_slices":0, "spf":0.8, "dev":"\/dev\/sdd", "protected":0, "reattachable":0, "max_volumes_per_disk":40, "max_latency_sensitive_vols_per_disk":2, "max_throughput_intensive_vols_per_disk":1, "pused":0, "allocated":0, "max_alloc_slices":693, "free_alloc_slices":693, "status":"ONLINE" }, { "node_ref":3, "wwn":"0x500a0751094903bd", "role":"Storage", "type":"SSD", "state":"READY", "capacity":960197124096, "pfree":748230279168, "maintenance_mode":"DISABLED", "make":"Crucial\/Micron BX\/MX1\/2\/3\/500", "zoneid":1664284022, "devpath":"\/dev\/disk\/by-id\/ata-Micron_M500_MTFDDAK960MAV_1332094903BD", "model":"Micron_M500_MTFDDAK960MAV", "alloc_slices":374, "spf":0.8, "dev":"\/dev\/sdf", "protected":0, "reattachable":0, "max_volumes_per_disk":40, "max_latency_sensitive_vols_per_disk":2, "max_throughput_intensive_vols_per_disk":1, "pused":188273917952, "allocated":343, "max_alloc_slices":693, "free_alloc_slices":319, "status":"ONLINE" }, { "node_ref":3, "wwn":"0x5002538c400656de", "role":"RootDisk", "type":"SSD", "state":"INIT", "capacity":960197124096, "pfree":0, "maintenance_mode":"DISABLED", "make":"Samsung based SSDs", "zoneid":1664284022, "devpath":"\/dev\/disk\/by-id\/ata-SAMSUNG_MZ7KM960HAHP-00005_S2HTNXAG904734", "model":"SAMSUNG MZ7KM960HAHP-00005", "alloc_slices":0, "spf":0.8, "dev":"\/dev\/sdb", "protected":0, "reattachable":0, "max_volumes_per_disk":40, "max_latency_sensitive_vols_per_disk":2, "max_throughput_intensive_vols_per_disk":1, "pused":0, "allocated":0, "max_alloc_slices":693, "free_alloc_slices":693, "status":"UNKNOWN" }, { "node_ref":3, "wwn":"0x500a0751094904f1", "role":"Storage", "type":"SSD", "state":"READY", "capacity":960197124096, "pfree":936504197120, "maintenance_mode":"DISABLED", "make":"Crucial\/Micron BX\/MX1\/2\/3\/500", "zoneid":1664284022, "devpath":"\/dev\/disk\/by-id\/ata-Micron_M500_MTFDDAK960MAV_1332094904F1", "model":"Micron_M500_MTFDDAK960MAV", "alloc_slices":0, "spf":0.8, "dev":"\/dev\/sde", "protected":0, "reattachable":0, "max_volumes_per_disk":40, "max_latency_sensitive_vols_per_disk":2, "max_throughput_intensive_vols_per_disk":1, "pused":0, "allocated":0, "max_alloc_slices":693, "free_alloc_slices":693, "status":"ONLINE" }, { "node_ref":3, "wwn":"0x500a075109604e78", "role":"Storage", "type":"SSD", "state":"READY", "capacity":960197124096, "pfree":936504197120, "maintenance_mode":"DISABLED", "make":"Crucial\/Micron BX\/MX1\/2\/3\/500", "zoneid":1664284022, "devpath":"\/dev\/disk\/by-id\/ata-Micron_M500_MTFDDAK960MAV_140109604E78", "model":"Micron_M500_MTFDDAK960MAV", "alloc_slices":0, "spf":0.8, "dev":"\/dev\/sdg", "protected":0, "reattachable":0, "max_volumes_per_disk":40, "max_latency_sensitive_vols_per_disk":2, "max_throughput_intensive_vols_per_disk":1, "pused":0, "allocated":0, "max_alloc_slices":693, "free_alloc_slices":693, "status":"ONLINE" }, { "node_ref":3, "wwn":"0x5002538c4006570e", "role":"RootDisk", "type":"SSD", "state":"INIT", "capacity":960197124096, "pfree":0, "maintenance_mode":"DISABLED", "make":"Samsung based SSDs", "zoneid":1664284022, "devpath":"\/dev\/disk\/by-id\/ata-SAMSUNG_MZ7KM960HAHP-00005_S2HTNXAG904752", "model":"SAMSUNG MZ7KM960HAHP-00005", "alloc_slices":0, "spf":0.8, "dev":"\/dev\/sda", "protected":0, "reattachable":0, "max_volumes_per_disk":40, "max_latency_sensitive_vols_per_disk":2, "max_throughput_intensive_vols_per_disk":1, "pused":0, "allocated":0, "max_alloc_slices":693, "free_alloc_slices":693, "status":"UNKNOWN" }, { "node_ref":3, "wwn":"0x500a075109604e6c", "role":"Storage", "type":"SSD", "state":"READY", "capacity":960197124096, "pfree":469661384704, "maintenance_mode":"DISABLED", "make":"Crucial\/Micron BX\/MX1\/2\/3\/500", "zoneid":1664284022, "devpath":"\/dev\/disk\/by-id\/ata-Micron_M500_MTFDDAK960MAV_140109604E6C", "model":"Micron_M500_MTFDDAK960MAV", "alloc_slices":692, "spf":0.8, "dev":"\/dev\/sdj", "protected":0, "reattachable":0, "max_volumes_per_disk":40, "max_latency_sensitive_vols_per_disk":2, "max_throughput_intensive_vols_per_disk":1, "pused":466842812416, "allocated":650, "max_alloc_slices":693, "free_alloc_slices":1, "status":"ONLINE" }, { "node_ref":3, "wwn":"0x500a075109604a0b", "role":"Storage", "type":"SSD", "state":"READY", "capacity":960197124096, "pfree":936504197120, "maintenance_mode":"DISABLED", "make":"Crucial\/Micron BX\/MX1\/2\/3\/500", "zoneid":1664284022, "devpath":"\/dev\/disk\/by-id\/ata-Micron_M500_MTFDDAK960MAV_140109604A0B", "model":"Micron_M500_MTFDDAK960MAV", "alloc_slices":0, "spf":0.8, "dev":"\/dev\/sdh", "protected":0, "reattachable":0, "max_volumes_per_disk":40, "max_latency_sensitive_vols_per_disk":2, "max_throughput_intensive_vols_per_disk":1, "pused":0, "allocated":0, "max_alloc_slices":693, "free_alloc_slices":693, "status":"ONLINE" } ], "roles":[ [ "STORAGE", "ONLINE", "READY" ], [ "COMPUTE", "ONLINE", "READY" ] ], "napps":11, "ipaddresses":[ { "mac_address":"00:25:90:fa:49:c8", "ip_address":"10.10.2.33", "netmask":"255.255.255.0" } ], "nics":[ { "mac_address":"00:25:90:fa:49:c8", "name":"br0", "physical_nic":"ens18f0", "numa_node":null, "native_vlan":null, "all_vlans_allowed":false, "untagged":false, "num_vfs":0, "used_vfs":0, "native_vfdriver":null, "mtu":1500, "vendor":null, "vendor_desc":null, "domain":null, "bus":null, "slot":null, "function":null, "maintenance_mode":null, "allowed_vlans":[ ], "vfdrivers":[ ], "state":"up", "max_bandwidth":0, "used_bandwidth":0, "vlan_interfaces":{ }, "linkstate":"up" }, { "mac_address":"00:25:90:fa:49:c9", "name":"ens18f1", "physical_nic":"ens18f1", "numa_node":0, "native_vlan":null, "all_vlans_allowed":false, "untagged":false, "num_vfs":0, "used_vfs":0, "native_vfdriver":null, "mtu":1500, "vendor":"8086", "vendor_desc":"Intel Corporation", "domain":"0000", "bus":"01", "slot":"00", "function":"1", "maintenance_mode":null, "allowed_vlans":[ ], "vfdrivers":[ ], "state":"up", "max_bandwidth":0, "used_bandwidth":0, "vlan_interfaces":{ }, "linkstate":"up" } ], "pci":[ ], "hdd_faulted":0, "ssd_faulted":0, "status":"Ready", "memory_used":10337910784, "sysmem":[ 270079143936, 257787629568, 9442762752, 0, 0, 0, 4200140800, 126976 ], "cpu_cores_used":0, "cpu_prov_factor":1, "hugepages_2m":0, "hugepages_1g":0, "hugepages_2m_allocated":0, "hugepages_1g_allocated":0, "k8s_node_name":"poch03", "k8s_node_status":"Ready", "remove_taint":true, "pods":100, "pods_used":21, "cpu_cores_present":40, "pods_reserved":10, "availability_zone":"N\/A", "gpus":[ ], "public_ip":"10.10.2.33", "reserved_cpus":[ 0 ], "non_isol_total":40, "isol_total":0, "kvm_emulatorpin_cpuset":"", "shared_cores_used":3, "guaranteed_cores_used":1, "robin_ephemeral_pods":0, "available_guaranteed_cores":36, "available_shared_cores":36, "prelim_total_cpus":39, "topology_manager":true, "rcm_ha_role":"NONE" }, { "id":1, "zoneid":1664284022, "state":"ONLINE", "gpu_cores":0, "cpu_cores":40, "maintenance_mode":"DISABLED", "memory":270079152128, "name":"poch01", "sysinfo":{ "distribution":"rocky", "system":"Linux", "release":"4.18.0-372.9.1.el8.x86_64", "version":"#1 SMP Tue May 10 14:48:47 UTC 2022", "processor":"x86_64", "boot_time":1664306878, "install_date":"Tue May 10 14:48:47 UTC 2022", "iqn":"iqn.1994-05.com.redhat:280cd28a85d", "wwpns":[ ], "robin_software":[ { "version":"5.4.1", "release":"25", "patch":"", "patch_date":"", "full_version":"5.4.1-25", "build_info":"robin-defd5ab9adce8fdfb7df57d6cbb50c28742deeb2:robin-ui:c45019c5e0e0dc0a6df2e28f5fa9d8b59ab5abb4:robingraph:6cc6485a7ffa817926962c683730d007b33636cc", "install_date":"2022-09-26" } ], "uuid":"", "current_version":"5.4.1-25", "join_time":1664258953 }, "hostname":"poch01.robinsystems.com", "public_hostname":"poch01.robinsystems.com", "mem_for_storage":21143632852, "rpool":"default", "services":{ "iomgr-server":{ "ActiveState":"active" }, "consul-client":{ "ActiveState":"active" }, "robin-agent":{ "ActiveState":"active" }, "monitor-server":{ "ActiveState":"active" }, "consul_dns":true }, "memory_allocated":0, "cpu_cores_allocated":0, "gpu_cores_allocated":0, "memory_reserved":25438600148, "ninstances":27, "disks":[ { "node_ref":1, "wwn":"0x500a075109604a16", "role":"Storage", "type":"SSD", "state":"READY", "capacity":960197124096, "pfree":841410936832, "maintenance_mode":"DISABLED", "make":"Crucial\/Micron BX\/MX1\/2\/3\/500", "zoneid":1664284022, "devpath":"\/dev\/disk\/by-id\/ata-Micron_M500_MTFDDAK960MAV_140109604A16", "model":"Micron_M500_MTFDDAK960MAV", "alloc_slices":356, "spf":0.8, "dev":"\/dev\/sdg", "protected":0, "reattachable":0, "max_volumes_per_disk":40, "max_latency_sensitive_vols_per_disk":2, "max_throughput_intensive_vols_per_disk":1, "pused":95093260288, "allocated":312, "max_alloc_slices":693, "free_alloc_slices":337, "status":"ONLINE" }, { "node_ref":1, "wwn":"0x5002538c4006a30d", "role":"Storage", "type":"SSD", "state":"READY", "capacity":960197124096, "pfree":936873295872, "maintenance_mode":"DISABLED", "make":"Samsung based SSDs", "zoneid":1664284022, "devpath":"\/dev\/disk\/by-id\/ata-SAMSUNG_MZ7KM960HAHP-00005_S2HTNXAG905558", "model":"SAMSUNG MZ7KM960HAHP-00005", "alloc_slices":0, "spf":0.8, "dev":"\/dev\/sde", "protected":0, "reattachable":0, "max_volumes_per_disk":40, "max_latency_sensitive_vols_per_disk":2, "max_throughput_intensive_vols_per_disk":1, "pused":0, "allocated":0, "max_alloc_slices":693, "free_alloc_slices":693, "status":"ONLINE" }, { "node_ref":1, "wwn":"0x5002538c4006a30e", "role":"Storage", "type":"SSD", "state":"READY", "capacity":960197124096, "pfree":936873295872, "maintenance_mode":"DISABLED", "make":"Samsung based SSDs", "zoneid":1664284022, "devpath":"\/dev\/disk\/by-id\/ata-SAMSUNG_MZ7KM960HAHP-00005_S2HTNXAG905559", "model":"SAMSUNG MZ7KM960HAHP-00005", "alloc_slices":0, "spf":0.8, "dev":"\/dev\/sdf", "protected":0, "reattachable":0, "max_volumes_per_disk":40, "max_latency_sensitive_vols_per_disk":2, "max_throughput_intensive_vols_per_disk":1, "pused":0, "allocated":0, "max_alloc_slices":693, "free_alloc_slices":693, "status":"ONLINE" }, { "node_ref":1, "wwn":"0x5002538c4006a30c", "role":"RootDisk", "type":"SSD", "state":"INIT", "capacity":960197124096, "pfree":0, "maintenance_mode":"DISABLED", "make":"Samsung based SSDs", "zoneid":1664284022, "devpath":"\/dev\/disk\/by-id\/ata-SAMSUNG_MZ7KM960HAHP-00005_S2HTNXAG905557", "model":"SAMSUNG MZ7KM960HAHP-00005", "alloc_slices":0, "spf":0.8, "dev":"\/dev\/sdi", "protected":0, "reattachable":0, "max_volumes_per_disk":40, "max_latency_sensitive_vols_per_disk":2, "max_throughput_intensive_vols_per_disk":1, "pused":0, "allocated":0, "max_alloc_slices":693, "free_alloc_slices":693, "status":"UNKNOWN" }, { "node_ref":1, "wwn":"0x5002538c400656e8", "role":"Storage", "type":"SSD", "state":"READY", "capacity":960197124096, "pfree":936873295872, "maintenance_mode":"DISABLED", "make":"Samsung based SSDs", "zoneid":1664284022, "devpath":"\/dev\/disk\/by-id\/ata-SAMSUNG_MZ7KM960HAHP-00005_S2HTNXAG904739", "model":"SAMSUNG MZ7KM960HAHP-00005", "alloc_slices":0, "spf":0.8, "dev":"\/dev\/sdc", "protected":0, "reattachable":0, "max_volumes_per_disk":40, "max_latency_sensitive_vols_per_disk":2, "max_throughput_intensive_vols_per_disk":1, "pused":0, "allocated":0, "max_alloc_slices":693, "free_alloc_slices":693, "status":"ONLINE" }, { "node_ref":1, "wwn":"0x5002538c4006567c", "role":"Storage", "type":"SSD", "state":"READY", "capacity":960197124096, "pfree":936873295872, "maintenance_mode":"DISABLED", "make":"Samsung based SSDs", "zoneid":1664284022, "devpath":"\/dev\/disk\/by-id\/ata-SAMSUNG_MZ7KM960HAHP-00005_S2HTNXAG904686", "model":"SAMSUNG MZ7KM960HAHP-00005", "alloc_slices":0, "spf":0.8, "dev":"\/dev\/sdb", "protected":0, "reattachable":0, "max_volumes_per_disk":40, "max_latency_sensitive_vols_per_disk":2, "max_throughput_intensive_vols_per_disk":1, "pused":0, "allocated":0, "max_alloc_slices":693, "free_alloc_slices":693, "status":"ONLINE" }, { "node_ref":1, "wwn":"0x500a07510966e793", "role":"Storage", "type":"SSD", "state":"READY", "capacity":960197124096, "pfree":936504197120, "maintenance_mode":"DISABLED", "make":"Crucial\/Micron BX\/MX1\/2\/3\/500", "zoneid":1664284022, "devpath":"\/dev\/disk\/by-id\/ata-Micron_M500_MTFDDAK960MAV_13270966E793", "model":"Micron_M500_MTFDDAK960MAV", "alloc_slices":0, "spf":0.8, "dev":"\/dev\/sdj", "protected":0, "reattachable":0, "max_volumes_per_disk":40, "max_latency_sensitive_vols_per_disk":2, "max_throughput_intensive_vols_per_disk":1, "pused":0, "allocated":0, "max_alloc_slices":693, "free_alloc_slices":693, "status":"ONLINE" }, { "node_ref":1, "wwn":"0x5002538c40065688", "role":"RootDisk", "type":"SSD", "state":"INIT", "capacity":960197124096, "pfree":0, "maintenance_mode":"DISABLED", "make":"Samsung based SSDs", "zoneid":1664284022, "devpath":"\/dev\/disk\/by-id\/ata-SAMSUNG_MZ7KM960HAHP-00005_S2HTNXAG904693", "model":"SAMSUNG MZ7KM960HAHP-00005", "alloc_slices":0, "spf":0.8, "dev":"\/dev\/sda", "protected":0, "reattachable":0, "max_volumes_per_disk":40, "max_latency_sensitive_vols_per_disk":2, "max_throughput_intensive_vols_per_disk":1, "pused":0, "allocated":0, "max_alloc_slices":693, "free_alloc_slices":693, "status":"UNKNOWN" }, { "node_ref":1, "wwn":"0x5002538c400656e7", "role":"RootDisk", "type":"SSD", "state":"INIT", "capacity":960197124096, "pfree":0, "maintenance_mode":"DISABLED", "make":"Samsung based SSDs", "zoneid":1664284022, "devpath":"\/dev\/disk\/by-id\/ata-SAMSUNG_MZ7KM960HAHP-00005_S2HTNXAG904738", "model":"SAMSUNG MZ7KM960HAHP-00005", "alloc_slices":0, "spf":0.8, "dev":"\/dev\/sdd", "protected":0, "reattachable":0, "max_volumes_per_disk":40, "max_latency_sensitive_vols_per_disk":2, "max_throughput_intensive_vols_per_disk":1, "pused":0, "allocated":0, "max_alloc_slices":693, "free_alloc_slices":693, "status":"UNKNOWN" }, { "node_ref":1, "wwn":"0x500a0751096049b7", "role":"Storage", "type":"SSD", "state":"READY", "capacity":960197124096, "pfree":454796771328, "maintenance_mode":"DISABLED", "make":"Crucial\/Micron BX\/MX1\/2\/3\/500", "zoneid":1664284022, "devpath":"\/dev\/disk\/by-id\/ata-Micron_M500_MTFDDAK960MAV_1401096049B7", "model":"Micron_M500_MTFDDAK960MAV", "alloc_slices":693, "spf":0.8, "dev":"\/dev\/sdh", "protected":0, "reattachable":0, "max_volumes_per_disk":40, "max_latency_sensitive_vols_per_disk":2, "max_throughput_intensive_vols_per_disk":1, "pused":481707425792, "allocated":651, "max_alloc_slices":693, "free_alloc_slices":0, "status":"ONLINE" } ], "roles":[ [ "STORAGE", "ONLINE", "READY" ], [ "COMPUTE", "ONLINE", "READY" ] ], "napps":23, "ipaddresses":[ { "mac_address":"00:25:90:fa:4a:5c", "ip_address":"10.10.2.31", "netmask":"255.255.255.0" } ], "nics":[ { "mac_address":"00:25:90:fa:4a:5c", "name":"br0", "physical_nic":"ens18f0", "numa_node":null, "native_vlan":null, "all_vlans_allowed":false, "untagged":false, "num_vfs":0, "used_vfs":0, "native_vfdriver":null, "mtu":1500, "vendor":null, "vendor_desc":null, "domain":null, "bus":null, "slot":null, "function":null, "maintenance_mode":null, "allowed_vlans":[ ], "vfdrivers":[ ], "state":"up", "max_bandwidth":0, "used_bandwidth":0, "vlan_interfaces":{ }, "linkstate":"up" }, { "mac_address":"00:25:90:fa:4a:5d", "name":"ens18f1", "physical_nic":"ens18f1", "numa_node":0, "native_vlan":null, "all_vlans_allowed":false, "untagged":false, "num_vfs":0, "used_vfs":0, "native_vfdriver":null, "mtu":1500, "vendor":"8086", "vendor_desc":"Intel Corporation", "domain":"0000", "bus":"01", "slot":"00", "function":"1", "maintenance_mode":null, "allowed_vlans":[ ], "vfdrivers":[ ], "state":"up", "max_bandwidth":0, "used_bandwidth":0, "vlan_interfaces":{ }, "linkstate":"up" } ], "pci":[ ], "hdd_faulted":0, "ssd_faulted":0, "status":"Ready", "memory_used":25689063424, "sysmem":[ 270079152128, 227238158336, 20731609088, 0, 0, 0, 23560785920, 98304 ], "cpu_cores_used":0, "cpu_prov_factor":1, "hugepages_2m":0, "hugepages_1g":0, "hugepages_2m_allocated":0, "hugepages_1g_allocated":0, "k8s_node_name":"poch01", "k8s_node_status":"Ready", "remove_taint":true, "pods":100, "pods_used":43, "cpu_cores_present":40, "pods_reserved":10, "availability_zone":"N\/A", "gpus":[ ], "public_ip":"10.10.2.31", "reserved_cpus":[ 0 ], "non_isol_total":40, "isol_total":0, "kvm_emulatorpin_cpuset":"", "shared_cores_used":6, "guaranteed_cores_used":1, "robin_ephemeral_pods":1, "available_guaranteed_cores":33, "available_shared_cores":33, "prelim_total_cpus":39, "topology_manager":true, "rcm_ha_role":"NONE" }, { "id":2, "zoneid":1664284022, "state":"ONLINE", "gpu_cores":0, "cpu_cores":40, "maintenance_mode":"DISABLED", "memory":270079143936, "name":"poch02", "sysinfo":{ "distribution":"rocky", "system":"Linux", "release":"4.18.0-372.9.1.el8.x86_64", "version":"#1 SMP Tue May 10 14:48:47 UTC 2022", "processor":"x86_64", "boot_time":1664305461, "install_date":"Tue May 10 14:48:47 UTC 2022", "iqn":"iqn.1994-05.com.redhat:9634b931eb9b", "wwpns":[ ], "robin_software":[ { "version":"5.4.1", "release":"25", "patch":"", "patch_date":"", "full_version":"5.4.1-25", "build_info":"robin-defd5ab9adce8fdfb7df57d6cbb50c28742deeb2:robin-ui:c45019c5e0e0dc0a6df2e28f5fa9d8b59ab5abb4:robingraph:6cc6485a7ffa817926962c683730d007b33636cc", "install_date":"2022-09-26" } ], "uuid":"", "current_version":"5.4.1-25", "join_time":1664259004 }, "hostname":"poch02.robinsystems.com", "public_hostname":"poch02.robinsystems.com", "mem_for_storage":3020518979, "rpool":"default", "services":{ "iomgr-server":{ "ActiveState":"active" }, "consul-client":{ "ActiveState":"active" }, "robin-agent":{ "ActiveState":"active" }, "monitor-server":{ "ActiveState":"active" }, "consul_dns":true }, "memory_allocated":0, "cpu_cores_allocated":0, "gpu_cores_allocated":0, "memory_reserved":7315486275, "ninstances":28, "disks":[ { "node_ref":2, "wwn":"0x5002538c4006a9d2", "role":"RootDisk", "type":"SSD", "state":"INIT", "capacity":960197124096, "pfree":0, "maintenance_mode":"DISABLED", "make":"Samsung based SSDs", "zoneid":1664284022, "devpath":"\/dev\/disk\/by-id\/ata-SAMSUNG_MZ7KM960HAHP-00005_S2HTNXAG906001", "model":"SAMSUNG MZ7KM960HAHP-00005", "alloc_slices":0, "spf":0.8, "dev":"\/dev\/sda", "protected":0, "reattachable":0, "max_volumes_per_disk":40, "max_latency_sensitive_vols_per_disk":2, "max_throughput_intensive_vols_per_disk":1, "pused":0, "allocated":0, "max_alloc_slices":693, "free_alloc_slices":693, "status":"UNKNOWN" }, { "node_ref":2, "wwn":"0x500a0751096049c0", "role":"RootDisk", "type":"SSD", "state":"INIT", "capacity":960197124096, "pfree":0, "maintenance_mode":"DISABLED", "make":"Crucial\/Micron BX\/MX1\/2\/3\/500", "zoneid":1664284022, "devpath":"\/dev\/disk\/by-id\/ata-Micron_M500_MTFDDAK960MAV_1401096049C0", "model":"Micron_M500_MTFDDAK960MAV", "alloc_slices":0, "spf":0.8, "dev":"\/dev\/sdh", "protected":0, "reattachable":0, "max_volumes_per_disk":40, "max_latency_sensitive_vols_per_disk":2, "max_throughput_intensive_vols_per_disk":1, "pused":0, "allocated":0, "max_alloc_slices":693, "free_alloc_slices":693, "status":"UNKNOWN" }, { "node_ref":2, "wwn":"0x5002538c4006a308", "role":"RootDisk", "type":"SSD", "state":"INIT", "capacity":960197124096, "pfree":0, "maintenance_mode":"DISABLED", "make":"Samsung based SSDs", "zoneid":1664284022, "devpath":"\/dev\/disk\/by-id\/ata-SAMSUNG_MZ7KM960HAHP-00005_S2HTNXAG905553", "model":"SAMSUNG MZ7KM960HAHP-00005", "alloc_slices":0, "spf":0.8, "dev":"\/dev\/sde", "protected":0, "reattachable":0, "max_volumes_per_disk":40, "max_latency_sensitive_vols_per_disk":2, "max_throughput_intensive_vols_per_disk":1, "pused":0, "allocated":0, "max_alloc_slices":693, "free_alloc_slices":693, "status":"UNKNOWN" }, { "node_ref":2, "wwn":"0x5002538c4006a2b0", "role":"RootDisk", "type":"SSD", "state":"INIT", "capacity":960197124096, "pfree":0, "maintenance_mode":"DISABLED", "make":"Samsung based SSDs", "zoneid":1664284022, "devpath":"\/dev\/disk\/by-id\/ata-SAMSUNG_MZ7KM960HAHP-00005_S2HTNXAG905465", "model":"SAMSUNG MZ7KM960HAHP-00005", "alloc_slices":0, "spf":0.8, "dev":"\/dev\/sdf", "protected":0, "reattachable":0, "max_volumes_per_disk":40, "max_latency_sensitive_vols_per_disk":2, "max_throughput_intensive_vols_per_disk":1, "pused":0, "allocated":0, "max_alloc_slices":693, "free_alloc_slices":693, "status":"UNKNOWN" }, { "node_ref":2, "wwn":"0x5002538c4006a9d3", "role":"RootDisk", "type":"SSD", "state":"INIT", "capacity":960197124096, "pfree":0, "maintenance_mode":"DISABLED", "make":"Samsung based SSDs", "zoneid":1664284022, "devpath":"\/dev\/disk\/by-id\/ata-SAMSUNG_MZ7KM960HAHP-00005_S2HTNXAG906002", "model":"SAMSUNG MZ7KM960HAHP-00005", "alloc_slices":0, "spf":0.8, "dev":"\/dev\/sdb", "protected":0, "reattachable":0, "max_volumes_per_disk":40, "max_latency_sensitive_vols_per_disk":2, "max_throughput_intensive_vols_per_disk":1, "pused":0, "allocated":0, "max_alloc_slices":693, "free_alloc_slices":693, "status":"UNKNOWN" }, { "node_ref":2, "wwn":"0x5002538c400656e6", "role":"RootDisk", "type":"SSD", "state":"INIT", "capacity":960197124096, "pfree":0, "maintenance_mode":"DISABLED", "make":"Samsung based SSDs", "zoneid":1664284022, "devpath":"\/dev\/disk\/by-id\/ata-SAMSUNG_MZ7KM960HAHP-00005_S2HTNXAG904737", "model":"SAMSUNG MZ7KM960HAHP-00005", "alloc_slices":0, "spf":0.8, "dev":"\/dev\/sdd", "protected":0, "reattachable":0, "max_volumes_per_disk":40, "max_latency_sensitive_vols_per_disk":2, "max_throughput_intensive_vols_per_disk":1, "pused":0, "allocated":0, "max_alloc_slices":693, "free_alloc_slices":693, "status":"UNKNOWN" }, { "node_ref":2, "wwn":"0x5002538c400656e9", "role":"RootDisk", "type":"SSD", "state":"INIT", "capacity":960197124096, "pfree":0, "maintenance_mode":"DISABLED", "make":"Samsung based SSDs", "zoneid":1664284022, "devpath":"\/dev\/disk\/by-id\/ata-SAMSUNG_MZ7KM960HAHP-00005_S2HTNXAG904740", "model":"SAMSUNG MZ7KM960HAHP-00005", "alloc_slices":0, "spf":0.8, "dev":"\/dev\/sdc", "protected":0, "reattachable":0, "max_volumes_per_disk":40, "max_latency_sensitive_vols_per_disk":2, "max_throughput_intensive_vols_per_disk":1, "pused":0, "allocated":0, "max_alloc_slices":693, "free_alloc_slices":693, "status":"UNKNOWN" }, { "node_ref":2, "wwn":"0x500a075109604a12", "role":"RootDisk", "type":"SSD", "state":"INIT", "capacity":960197124096, "pfree":0, "maintenance_mode":"DISABLED", "make":"Crucial\/Micron BX\/MX1\/2\/3\/500", "zoneid":1664284022, "devpath":"\/dev\/disk\/by-id\/ata-Micron_M500_MTFDDAK960MAV_140109604A12", "model":"Micron_M500_MTFDDAK960MAV", "alloc_slices":0, "spf":0.8, "dev":"\/dev\/sdg", "protected":0, "reattachable":0, "max_volumes_per_disk":40, "max_latency_sensitive_vols_per_disk":2, "max_throughput_intensive_vols_per_disk":1, "pused":0, "allocated":0, "max_alloc_slices":693, "free_alloc_slices":693, "status":"UNKNOWN" }, { "node_ref":2, "wwn":"0x5002538c4006a2fb", "role":"RootDisk", "type":"SSD", "state":"INIT", "capacity":960197124096, "pfree":0, "maintenance_mode":"DISABLED", "make":"Samsung based SSDs", "zoneid":1664284022, "devpath":"\/dev\/disk\/by-id\/ata-SAMSUNG_MZ7KM960HAHP-00005_S2HTNXAG905540", "model":"SAMSUNG MZ7KM960HAHP-00005", "alloc_slices":0, "spf":0.8, "dev":"\/dev\/sdi", "protected":0, "reattachable":0, "max_volumes_per_disk":40, "max_latency_sensitive_vols_per_disk":2, "max_throughput_intensive_vols_per_disk":1, "pused":0, "allocated":0, "max_alloc_slices":693, "free_alloc_slices":693, "status":"UNKNOWN" }, { "node_ref":2, "wwn":"0x500a0751096049dc", "role":"Storage", "type":"SSD", "state":"READY", "capacity":960197124096, "pfree":855872897024, "maintenance_mode":"DISABLED", "make":"Crucial\/Micron BX\/MX1\/2\/3\/500", "zoneid":1664284022, "devpath":"\/dev\/disk\/by-id\/ata-Micron_M500_MTFDDAK960MAV_1401096049DC", "model":"Micron_M500_MTFDDAK960MAV", "alloc_slices":254, "spf":0.8, "dev":"\/dev\/sdj", "protected":0, "reattachable":0, "max_volumes_per_disk":40, "max_latency_sensitive_vols_per_disk":2, "max_throughput_intensive_vols_per_disk":1, "pused":80631300096, "allocated":229, "max_alloc_slices":693, "free_alloc_slices":439, "status":"ONLINE" } ], "roles":[ [ "STORAGE", "ONLINE", "READY" ], [ "COMPUTE", "ONLINE", "READY" ] ], "napps":28, "ipaddresses":[ { "mac_address":"00:25:90:fa:48:88", "ip_address":"10.10.2.32", "netmask":"255.255.255.0" } ], "nics":[ { "mac_address":"00:25:90:fa:48:88", "name":"br0", "physical_nic":"ens18f0", "numa_node":null, "native_vlan":null, "all_vlans_allowed":false, "untagged":false, "num_vfs":0, "used_vfs":0, "native_vfdriver":null, "mtu":1500, "vendor":null, "vendor_desc":null, "domain":null, "bus":null, "slot":null, "function":null, "maintenance_mode":null, "allowed_vlans":[ ], "vfdrivers":[ ], "state":"up", "max_bandwidth":0, "used_bandwidth":0, "vlan_interfaces":{ }, "linkstate":"up" }, { "mac_address":"00:25:90:fa:48:89", "name":"ens18f1", "physical_nic":"ens18f1", "numa_node":0, "native_vlan":null, "all_vlans_allowed":false, "untagged":false, "num_vfs":0, "used_vfs":0, "native_vfdriver":null, "mtu":1500, "vendor":"8086", "vendor_desc":"Intel Corporation", "domain":"0000", "bus":"01", "slot":"00", "function":"1", "maintenance_mode":null, "allowed_vlans":[ ], "vfdrivers":[ ], "state":"up", "max_bandwidth":0, "used_bandwidth":0, "vlan_interfaces":{ }, "linkstate":"up" } ], "pci":[ ], "hdd_faulted":0, "ssd_faulted":0, "status":"Ready", "memory_used":35581329408, "sysmem":[ 270079143936, 254536040448, 11728973824, 0, 0, 0, 5252657152, 3022848 ], "cpu_cores_used":0, "cpu_prov_factor":1, "hugepages_2m":0, "hugepages_1g":0, "hugepages_2m_allocated":0, "hugepages_1g_allocated":0, "k8s_node_name":"poch02", "k8s_node_status":"Ready", "remove_taint":true, "pods":100, "pods_used":57, "cpu_cores_present":40, "pods_reserved":10, "availability_zone":"N\/A", "gpus":[ ], "public_ip":"10.10.2.32", "reserved_cpus":[ 0 ], "non_isol_total":40, "isol_total":0, "kvm_emulatorpin_cpuset":"", "shared_cores_used":7, "guaranteed_cores_used":1, "robin_ephemeral_pods":0, "available_guaranteed_cores":32, "available_shared_cores":32, "prelim_total_cpus":39, "topology_manager":true, "rcm_ha_role":"NONE" } ] } .. raw:: html
======================================= Show information about a specific host ======================================= .. tabs:: .. tab:: CLI In order to display detailed information for a host such as the storage allocation breakdown, discovered physical attributes with their utilization (NUMA configuration, network topology etc.) and service details, issue the following command: .. code-block:: text # robin host info --services --resources --config --consul --json ============================ ====================================================================================== ``hostname`` FQDN of host ``--services`` Show status information for the host ``--resources`` Show resource utilization for the host ``--config`` Show config info ``--consul`` Show consul cluster info ``--json`` Output in JSON ============================ ====================================================================================== **Example:** .. code-block:: text # robin host info poch01.robin.io .. raw:: html
Output .. code-block:: text Host: qct-07.robinsystems.com Zone Id: 1596566663 Host Id: 4 Type: physical Version: 5.3.0-172 Kernel Version: 3.10.0-1062.el7.x86_64 Boot Time: 04 Aug 2020 03:18:01 Resource pool: workers CPU: Total Cores: 80 Total Isolated Cores: 76 Total Non-Isolated Cores: 4 Non-Isolated CPUs allocated: 1 Shared Isolated CPUs allocated: 8 Dedicated Isolated CPUs allocated: 68 Provisioning Factor: 1 NUMA Topology: Node 0: Total Memory: 187G Total Isolated CPUs: 38 Total Non-Isolated CPUs: 2 Total Reserved CPUs: 0 Non-Isolated Pinned CPUs: 0 Isolated Shared Pinned CPUs: 0 Isolated Dedicated Pinned CPUs: 38 Total HugePages_1G: - Total HugePages_2M: - CPU List: 1-19,41-59 NIC List: enp94s0f0,enp59s0f0,enp59s0f1,enp94s0f1 Node 1: Total Memory: 188G Total Isolated CPUs: 38 Total Non-Isolated CPUs: 2 Total Reserved CPUs: 0 Non-Isolated Pinned CPUs: 0 Isolated Shared Pinned CPUs: 8 Isolated Dedicated Pinned CPUs: 30 Total HugePages_1G: - Total HugePages_2M: - CPU List: 21-39,61-79 NIC List: enp175s0f1,enp175s0f0 GPU: Total Cores: 0 Memory: System Total: 376G Allocatable Total: 376G Reserved: 6G Robin Manager services: - Robin Compute services: 4G Robin Storage services: 2G Memory allocated to instances: 88G Free Total: 292G HugePages_2M: Total: - Allocated for Robin apps: - HugePages_1G: Total: - Allocated for Robin apps: - POD Utilization: 83/110 Network: Bridge Interface: br0 Physical Interface: enp94s0f1 MTU: 1500 Product Info: 158B - Ethernet Controller XXV710 for 25GbE SFP28 (Ethernet Network Adapter XXV710) Vendor Info: 8086 - Intel Corporation NUMA Node: 0 H/W Info: 0000:5e:00.1 IP Addresses: 10.9.20.15/16 Interface: enp175s0f1 MTU: 1500 Product Info: 158B - Ethernet Controller XXV710 for 25GbE SFP28 (Ethernet Network Adapter XXV710) Vendor Info: 8086 - Intel Corporation NUMA Node: 1 H/W Info: 0000:af:00.1 Interface: enp175s0f0 MTU: 1500 Product Info: 158B - Ethernet Controller XXV710 for 25GbE SFP28 (Ethernet Network Adapter XXV710-2) Vendor Info: 8086 - Intel Corporation NUMA Node: 1 H/W Info: 0000:af:00.0 Interface: enp94s0f0 MTU: 1500 Product Info: 158B - Ethernet Controller XXV710 for 25GbE SFP28 (Ethernet Network Adapter OCP XXV710-2) Vendor Info: 8086 - Intel Corporation NUMA Node: 0 H/W Info: 0000:5e:00.0 Interface: enp59s0f0 MTU: 1500 Product Info: 158B - Ethernet Controller XXV710 for 25GbE SFP28 (Ethernet Network Adapter XXV710-2) Vendor Info: 8086 - Intel Corporation NUMA Node: 0 H/W Info: 0000:3b:00.0 Interface: enp59s0f1 MTU: 1500 Product Info: 158B - Ethernet Controller XXV710 for 25GbE SFP28 (Ethernet Network Adapter XXV710) Vendor Info: 8086 - Intel Corporation NUMA Node: 0 H/W Info: 0000:3b:00.1 Public IP Address: 10.9.20.15 Public Hostname: qct-07.robinsystems.com Instances: 69 State: ONLINE Status: Ready K8s_Node_Status: Ready Maintenance Mode: DISABLED Consul state: UP Roles: STORAGE: ONLINE Status:READY COMPUTE: ONLINE Status:READY Storage: Type | Used (GB) | Robin Allocated (GB) | K8s Allocated (GB) | Total (GB) -----+-----------+----------------------+--------------------+------------ HDD | 38 | 538 | 16 | 893 SSD | - | - | - | - Services: Name | State | RoleTags | PID | Started -------------------+-------+----------+------+---------------------------- consul-client | UP | A | 351 | 2020-08-04 17:51:31.538657 consul-server | DOWN | M | 0 | 0 gui-cli | UP | - | 1132 | 2020-08-04 17:51:50.479143 httpd | UP | * | 1077 | 2020-08-04 17:51:50.116133 iomgr-server | UP | C S | 5391 | 2020-08-04 17:52:16.467809 monitor-server | UP | M C S | 539 | 2020-08-04 17:51:42.748944 postgresql-9.6 | DOWN | M | 0 | 0 robin-agent | UP | M C S | 600 | 2020-08-04 17:51:45.394012 robin-auth-server | DOWN | M* | 0 | 0 robin-event-server | DOWN | M* | 0 | 0 robin-file-server | DOWN | M* | 0 | 0 robin-node-monitor | DOWN | M* | 0 | 0 robin-server | DOWN | M* | 0 | 0 robin-watchdog | DOWN | M | 0 | 0 sherlock-server | DOWN | - | 0 | 0 stormgr-server | DOWN | M* | 0 | 0 Last updated (04 Aug 2020 18:40:14) UP: Running CRIT: Critical and Down DOWN: Not Running Root Disk storage info: Partition | Name | Size (GB) | Available (GB) --------------------------+-----------------+-----------+---------------- /var/log | RobinLog | 299 | 268 /var/lib/pgsql | Pgsql | 299 | 268 /var/crash | Crash | 299 | 268 /var/lib/robin | RobinLib | 299 | 268 /var/lib/[appropriateCRI] | ContainerImages | 15 | - Unused container images: 6G Image | Size (GB) --------------------------------------------+----------- k8s.gcr.io/kube-controller-manager:v1.18.6 | 0.15 k8s.gcr.io/kube-apiserver:v1.18.6 | 0.16 k8s.gcr.io/kube-scheduler:v1.18.6 | 0.09 robinsys/robinimg:5.2.7-18 | 3 quay.io/k8scsi/csi-provisioner:v1.6.0_robin | 0.04 k8s.gcr.io/kube-proxy:v1.17.5 | 0.11 k8s.gcr.io/kube-apiserver:v1.17.5 | 0.16 k8s.gcr.io/kube-controller-manager:v1.17.5 | 0.15 k8s.gcr.io/kube-scheduler:v1.17.5 | 0.09 quay.io/k8scsi/snapshot-controller:v2.1.0 | 0.04 k8s.gcr.io/pause:3.2 | 0.0 prom/prometheus:v2.16.0 | 0.12 quay.io/k8scsi/csi-attacher:v2.1.0 | 0.04 calico/typha:v3.11.1 | 0.05 calico/pod2daemon-flexvol:v3.11.1 | 0.1 calico/cni:v3.11.1 | 0.18 calico/kube-controllers:v3.11.1 | 0.05 quay.io/k8scsi/csi-provisioner:v1.4.0_robin | 0.05 k8s.gcr.io/kube-proxy:v1.16.3 | 0.08 k8s.gcr.io/kube-apiserver:v1.16.3 | 0.2 k8s.gcr.io/kube-controller-manager:v1.16.3 | 0.15 k8s.gcr.io/kube-scheduler:v1.16.3 | 0.08 k8s.gcr.io/coredns:1.6.5 | 0.04 metallb/controller:v0.8.2 | 0.04 metallb/speaker:v0.8.2 | 0.04 k8s.gcr.io/etcd:3.4.3-0 | 0.27 quay.io/k8scsi/csi-snapshotter:v1.2.2 | 0.04 k8s.gcr.io/etcd:3.3.15-0 | 0.23 quay.io/k8scsi/csi-attacher:v1.2.1 | 0.04 k8s.gcr.io/coredns:1.6.2 | 0.04 robinsys/genie-plugin:v3.0 | 0.02 quay.io/k8scsi/csi-provisioner:v1.0.0_robin | 0.04 quay.io/k8scsi/csi-provisioner:v0.4.1_robin | 0.04 robinsys/coredns:1.2.2 | 0.03 .. raw:: html
.. tab:: API Returns detailed information for a host such as the storage allocation breakdown, discovered physical attributes with their utilization (NUMA configuration, network topology etc.) and service details. **End Point:** /api/v3/robin_server/hosts/ **Method:** GET **URL Parameters:** - ``diskinfo=true`` : Utilizing this parameter results in details of the disks attached to the specified host being returned. **Data Parameters:** None **Port:** RCM Port (default value is 29442) **Headers:** - ``Authorization: `` : Authorization token to identify which user is sending the request. The token can be acquired from the login API. **Success Response Code:** 200 **Error Response Code:** 500 (Internal Server Error), 404 (Not Found Error), 401 (Unauthorized Error) **Example Response:** .. raw:: html
Output .. code-block:: text { "items":[ { "memory_used":2692743168, "hdd_lalloc":35433480192.0, "memory":33555709952, "lab":"default", "saas_mode":false, "zoneid":1596601846, "non_isol_total_with_prov":400, "zone_name":"default", "rack":"default", "ipaddresses":[ { "ip_address":"10.9.82.140", "mac_address":"00:15:5d:14:06:0e", "netmask":"255.255.0.0" } ], "public_ip":"10.9.82.140", "ssd_nonrobin_usage":0, "k8s_node_name":"cscale-82-140", "mem_for_storage":1073741824, "id":1, "ssd_for_storage":0, "rcm_ha_role":"MANAGER_MASTER", "ssd_robin_usage":0, "gpu_cores_allocated":0, "numa_map":{ "0":{ "memory_used":0, "hugepages_1g_used":0, "isol_total":0, "isol_shared_map":{ }, "cpu_reserved":0, "numa_id":0, "non_isol_cores_used":2, "cpu_ids":"", "cpu_used":0, "mem_used":1493172224, "non_isol_total":20, "hugepages_2m_used":0, "gpu_used":0, "isol_shared_cores_used":0, "hugepages_1g_total":0, "cpu_total":20, "hugepages_2m_total":0, "memory_total":16777626965, "isol_dedicated_cores_used":0 }, "1":{ "memory_used":0, "hugepages_1g_used":0, "isol_total":0, "isol_shared_map":{ }, "cpu_reserved":0, "numa_id":1, "non_isol_cores_used":0, "cpu_ids":"", "cpu_used":0, "mem_used":0, "non_isol_total":20, "hugepages_2m_used":0, "gpu_used":0, "isol_shared_cores_used":0, "hugepages_1g_total":0, "cpu_total":20, "hugepages_2m_total":0, "memory_total":16778082988, "isol_dedicated_cores_used":0 } }, "roles":[ [ "MANAGER", "ONLINE", "READY" ], [ "COMPUTE", "ONLINE", "READY" ], [ "STORAGE", "ONLINE", "READY" ] ], "ssd_max_alloc_slices":0, "cpu_prov_factor":10, "services":{ "update_time":1596761892.3700919151, "services":{ "consul_dns":true, "stormgr-server":{ "MainPID":2299, "Type":"simple", "ExecMainStartTimestamp":"2020-08-04 14:31:26.794916", "RoleTags":[ "M*" ], "Id":"stormgr-server", "State":"UP", "ActiveState":"active" }, "gui-cli":{ "MainPID":2647, "Type":"simple", "ExecMainStartTimestamp":"2020-08-04 14:31:32.291459", "RoleTags":[ "-" ], "Id":"gui-cli", "State":"UP", "ActiveState":"active" }, "consul-client":{ "MainPID":0, "Type":"simple", "ExecMainStartTimestamp":0, "RoleTags":[ "A" ], "Id":"consul-client", "State":"DOWN", "ActiveState":"inactive" }, "robin-server":{ "MainPID":64400, "Type":"simple", "ExecMainStartTimestamp":"2020-08-06 17:57:55.208502", "RoleTags":[ "M*" ], "Id":"robin-server", "State":"UP", "ActiveState":"active" }, "robin-node-monitor":{ "MainPID":1278, "Type":"simple", "ExecMainStartTimestamp":"2020-08-04 14:31:13.459063", "RoleTags":[ "M*" ], "Id":"robin-node-monitor", "State":"UP", "ActiveState":"active" }, "iomgr-server":{ "MainPID":7384, "Type":"simple", "ExecMainStartTimestamp":"2020-08-04 14:55:13.851492", "RoleTags":[ "C", "S" ], "Id":"iomgr-server", "State":"UP", "ActiveState":"active" }, "consul_members":[ { "DelegateMax":5, "ProtocolCur":2, "Port":29460, "Status":1, "ProtocolMax":5, "DelegateCur":4, "Tags":{ "dc":"consul", "role":"consul", "vsn":"2", "wan_join_port":"29461", "segment":"", "port":"29459", "raft_vsn":"2", "vsn_min":"2", "vsn_max":"3", "id":"9dbc13cd-bbb4-1bf1-9bcd-f3d7e0f0026f", "bootstrap":"1", "build":"0.9.4:40f243a+" }, "ProtocolMin":1, "Name":"cscale-82-140.robinsystems.com", "Addr":"10.9.82.140", "DelegateMin":2 } ], "robin-file-server":{ "MainPID":1071, "Type":"simple", "ExecMainStartTimestamp":"2020-08-04 14:30:55.801664", "RoleTags":[ "M*" ], "Id":"robin-file-server", "State":"UP", "ActiveState":"active" }, "robin-event-server":{ "MainPID":1039, "Type":"simple", "ExecMainStartTimestamp":"2020-08-04 14:30:55.322709", "RoleTags":[ "M*" ], "Id":"robin-event-server", "State":"UP", "ActiveState":"active" }, "sherlock-server":{ "MainPID":0, "Type":"simple", "ExecMainStartTimestamp":0, "RoleTags":[ "-" ], "Id":"sherlock-server", "State":"DOWN", "ActiveState":"inactive" }, "robin-agent":{ "MainPID":9186, "Type":"simple", "ExecMainStartTimestamp":"2020-08-04 14:59:23.165676", "RoleTags":[ "M", "C", "S" ], "Id":"robin-agent", "State":"UP", "ActiveState":"active" }, "postgresql-9.6":{ "MainPID":660, "Type":"simple", "ExecMainStartTimestamp":"2020-08-04 14:30:34.988682", "RoleTags":[ "M" ], "Id":"postgresql-9.6", "State":"UP", "ActiveState":"active" }, "consul-server":{ "MainPID":564, "Type":"simple", "ExecMainStartTimestamp":"2020-08-04 14:30:32.432940", "RoleTags":[ "M" ], "Id":"consul-server", "State":"UP", "ActiveState":"active" }, "httpd":{ "MainPID":2613, "Type":"simple", "ExecMainStartTimestamp":"2020-08-04 14:31:32.124472", "RoleTags":[ "*" ], "Id":"httpd", "State":"UP", "ActiveState":"active" }, "robin-auth-server":{ "MainPID":1010, "Type":"simple", "ExecMainStartTimestamp":"2020-08-04 14:30:50.844131", "RoleTags":[ "M*" ], "Id":"robin-auth-server", "State":"UP", "ActiveState":"active" }, "robin-watchdog":{ "MainPID":860, "Type":"simple", "ExecMainStartTimestamp":"2020-08-04 14:30:37.982382", "RoleTags":[ "M" ], "Id":"robin-watchdog", "State":"UP", "ActiveState":"active" }, "monitor-server":{ "MainPID":2687, "Type":"simple", "ExecMainStartTimestamp":"2020-08-04 14:31:32.455445", "RoleTags":[ "M", "C", "S" ], "Id":"monitor-server", "State":"UP", "ActiveState":"active" } } }, "non_isol_total":40, "gpu_cores":0, "hdd_robin_usage":35433480192, "visibledisks":[ "0x600224801d3ac9b6650afd3280aa5898", "0x600224801d3ac9b6650afd3280aa5898-centos-root", "0x600224801d3ac9b6650afd3280aa5898-centos-swap", "0x600224801d3ac9b6650afd3280aa5898-centos-home", "0x600224804c48fd7e16c608dea0919064", "0x600224803bcdafde95b1f5cd27ceb5fb" ], "ssd_faulted":0, "isol_shared_cores_used":0, "nic_details":{ "br0":{ "vfdrivers":[ ], "product_desc":null, "all_vlans_allowed":false, "mtu":1500, "bus":null, "vendor_id":null, "slot":null, "physical_nic":"eth0", "allowed_vlans":[ ], "num_vfs":0, "function":null, "ips":[ "10.9.82.140\/16" ], "product_id":null, "local_cpulist":null, "native_vlan":null, "vendor_desc":null, "domain":null, "untagged":false, "used_vfs":0, "numa_node":null } }, "ninstances":2, "non_isol_cores_used":3, "maintenance_mode":"DISABLED", "memory_allocated":0, "mem_for_management":1073741824.0, "rpool_id":1, "hdd_for_storage":214748364800, "datacenter":"default", "tags":{ "kubernetes.io\/os":[ "linux" ], "robin.io\/robinrpool":[ "default" ], "kubernetes.io\/arch":[ "amd64" ] }, "hugepages_1g":0, "hugepages_2m_allocated":0, "rpool":"default", "hdd_total":428414599168, "ssd_free_alloc_slices":0, "pods":110, "state":"ONLINE", "status":"Ready", "instances":[ { "state":"STARTED", "name":"rohan-app.nginx.03", "hostname":"rohan-app-nginx-03.t001-u000003.svc.cluster.local" }, { "state":"STARTED", "name":"test-RIC-1.server.01", "hostname":"test-ric-1-server-01.t001-u000003.svc.cluster.local" } ], "isol_dedicated_cores_used":0, "host_type":"physical", "ssd_pused":0, "isol_total":0, "primary_ip":"10.9.82.140", "isol_shared_map":{ }, "hugepages_2m":0, "pods_used":26, "hdd_lused":0, "hdd_faulted":0, "napps":2, "hdd_nonrobin_usage":0, "cpu_cores_present":40, "ssd_total":0, "cpu_cores_allocated":0, "is_master":true, "memory_reserved":6442450944.0, "cpu_cores":400, "config":{ "stormgr_rest_port":29454, "monitor_host_mem_lowmark":0.8, "monitor_host_root_volume_highmark":0.9, "rio_rest_port":29456, "stormgr_rest_listen_addr":"127.0.0.1", "kvm_enabled":true, "hard_reset_on_isolation":0, "monitor_host_cpu_lowmark":0.8, "monitor_host_var_crash_volume_highmark":0.9, "monitor_interval":1, "monitor_host_var_pgsql_volume_lowmark":0.5, "kubelet_restart_bursttime":25, "server_rest_port":29442, "kubelet_restart_burstlimit":2, "event_server_port":29449, "rio_rpc_port":29453, "rdvm_bmapcache_skip_all":0, "rdvm_mem_maxcap":25769803776, "rest_server":"cscale-82-140.robinsystems.com", "registration_timeout":10, "rdvm_rpc_port":29452, "node_exporter_port":29457, "stormgr_rpc_port":29451, "monitor_host_root_volume_lowmark":0.85, "database_port":29458, "rdvm_rest_listen_addr":"127.0.0.1", "https_port":29443, "metrics_grafana_details":"{\"url\": \"\", \"auth\": \":\"}", "monitor_host_var_volume_lowmark":0.85, "monitor_host_cpu_highmark":0.85, "rio_rest_listen_addr":"127.0.0.1", "monitor_host_var_robin_volume_highmark":0.9, "rdvm_mem_alloc":1073741824, "monitor_num_samples":3600, "monitor_host_swap_lowmark":0.75, "watchdog_loop_interval":3, "rdvm_rest_port":29455, "monitor_container_swap_highmark":0.8, "consul_serfwan_port":29461, "saas_mode":false, "file_object_cache":"\/var\/lib\/robin\/file_object_cache", "node_monitor_port":29467, "monitor_influx_details":"{\"url\": \"\", \"dbname\": \"robin\", \"auth\": \":\" }", "consul_http_port":29462, "monitor_container_swap_lowmark":0.75, "hostname":"cscale-82-140.robinsystems.com", "monitor_host_var_volume_highmark":0.9, "network_type":4, "suicide_threshold":50, "mem_for_compute":null, "mem_for_management":null, "sherlock_rest_port":29446, "nfs_mount_options":"nolock,rw,timeo=60", "rediscover_timeout":120, "kvm_emulatorpin_cpuset":"", "rdvm_bmapcache_invalidate_all":0, "consul_serflan_port":29460, "monitor_host_var_robin_volume_lowmark":0.85, "rest_port":29450, "monitor_report_interval":5, "host_type":"physical", "monitor_host_swap_highmark":0.8, "nodejs_port":29447, "monitor_push_interval":60, "ovs_enabled":true, "monitor_host_var_log_volume_highmark":0.9, "kubelet_restart_tolerance":15, "monitor_host_mem_highmark":0.85, "monitor_host_var_log_volume_lowmark":0.85, "log_level":10, "monitor_host_var_crash_volume_lowmark":0.85, "monitor_container_volume_highmark":0.9, "monitor_container_volume_lowmark":0.85, "consul_server_port":29459, "monitor_host_var_pgsql_volume_highmark":0.7 }, "ssd_lused":0, "hugepages_1g_allocated":0, "k8s_node_status":"Ready", "hdd_free_alloc_slices":293131517952.0, "ssd_lalloc":0, "hostname":"cscale-82-140.robinsystems.com", "public_hostname":"cscale-82-140.robinsystems.com", "hdd_max_alloc_slices":328564998144.0, "memory_total":33555709952, "mem_for_compute":4294967296, "sysinfo":{ "join_time":1596576678, "current_version":"5.3.0-171", "iqn":"iqn.1994-05.com.redhat:329b8568de1", "install_date":"Tue Mar 17 23:49:17 UTC 2020", "wwpns":[ ], "distribution":"CentOS Linux", "version":"#1 SMP Tue Mar 17 23:49:17 UTC 2020", "uuid":"", "boot_time":1596576222, "robin_software":[ { "version":"5.3.0", "patch":"", "full_version":"5.3.0-171", "install_date":"2020-08-03", "patch_date":"", "release":"171", "build_info":"robin-c2edf85eaa83a42ced9512e7de9c7c2f1e4fa962:robin-ui:9ee33fd00273ba19861d4dc3ef8c6169d822d3e0:robingraph:cf0ceefe696ccac2dbd2eeb1d28b859955452843" } ], "release":"3.10.0-1062.18.1.el7.x86_64", "system":"Linux", "processor":"x86_64" }, "hdd_pused":1174405120, "disks":[ { "spf":0.8, "zoneid":1596601846, "dev":"\/dev\/sda", "aslices":0, "nodeid":1, "maintenance_mode":"OFF", "role":"RootDisk", "protected":0, "status":"UNKNOWN", "make":null, "reattachable_nodes":[ [ "cscale-82-140.robinsystems.com", "ONLINE" ] ], "capacity":107374182400, "max_latency_sensitive_vols_per_disk":2, "pfree":0, "node_hostname":"cscale-82-140.robinsystems.com", "tags":{ }, "pused":0, "type":"HDD", "nvols":0, "state":"INIT", "reattachpolicy":{ "restarts_done":0, "burst_count":0, "burst_start_time":0, "burst_interval":600, "id":1, "restart_limit":5 }, "max_alloc_slices":77, "stormgrid":0, "free_alloc_slices":77, "slices":0, "availability_zone":null, "max_throughput_intensive_vols_per_disk":1, "model":null, "lused_size":0, "devpath":"\/dev\/disk\/by-id\/scsi-3600224801d3ac9b6650afd3280aa5898", "alloc_slices":0, "reattachable":0, "max_volumes_per_disk":10, "wwn":"0x600224801d3ac9b6650afd3280aa5898", "allocations":[ ], "alloc_score":0, "node_ref":1, "preserved":0 }, { "spf":0.8, "zoneid":1596601846, "dev":"\/dev\/dm-0", "aslices":0, "nodeid":1, "maintenance_mode":"OFF", "role":"RootDisk", "protected":0, "status":"UNKNOWN", "make":null, "reattachable_nodes":[ [ "cscale-82-140.robinsystems.com", "ONLINE" ] ], "capacity":53687091200, "max_latency_sensitive_vols_per_disk":2, "pfree":0, "node_hostname":"cscale-82-140.robinsystems.com", "tags":{ }, "pused":0, "type":"HDD", "nvols":0, "state":"INIT", "reattachpolicy":{ "restarts_done":0, "burst_count":0, "burst_start_time":0, "burst_interval":600, "id":4, "restart_limit":5 }, "max_alloc_slices":38, "stormgrid":0, "free_alloc_slices":38, "slices":0, "availability_zone":null, "max_throughput_intensive_vols_per_disk":1, "model":null, "lused_size":0, "devpath":"\/dev\/disk\/by-id\/dm-uuid-LVM-vI83PDTxV3H0dWyAXfH5ef7rxTOuYyphgpZcvqGdfOKaXbEbOZzNthc6btsoSXDj", "alloc_slices":0, "reattachable":0, "max_volumes_per_disk":10, "wwn":"0x600224801d3ac9b6650afd3280aa5898-centos-root", "allocations":[ ], "alloc_score":0, "node_ref":1, "preserved":0 }, { "spf":0.8, "zoneid":1596601846, "dev":"\/dev\/dm-1", "aslices":0, "nodeid":1, "maintenance_mode":"OFF", "role":"RootDisk", "protected":0, "status":"UNKNOWN", "make":null, "reattachable_nodes":[ [ "cscale-82-140.robinsystems.com", "ONLINE" ] ], "capacity":8254390272, "max_latency_sensitive_vols_per_disk":2, "pfree":0, "node_hostname":"cscale-82-140.robinsystems.com", "tags":{ }, "pused":0, "type":"HDD", "nvols":0, "state":"INIT", "reattachpolicy":{ "restarts_done":0, "burst_count":0, "burst_start_time":0, "burst_interval":600, "id":5, "restart_limit":5 }, "max_alloc_slices":5, "stormgrid":0, "free_alloc_slices":5, "slices":0, "availability_zone":null, "max_throughput_intensive_vols_per_disk":1, "model":null, "lused_size":0, "devpath":"\/dev\/disk\/by-id\/dm-uuid-LVM-vI83PDTxV3H0dWyAXfH5ef7rxTOuYyphaFy4aq3EUo1yluonS8FG0LF16ycBrdEw", "alloc_slices":0, "reattachable":0, "max_volumes_per_disk":10, "wwn":"0x600224801d3ac9b6650afd3280aa5898-centos-swap", "allocations":[ ], "alloc_score":0, "node_ref":1, "preserved":0 }, { "spf":0.8, "zoneid":1596601846, "dev":"\/dev\/dm-2", "aslices":0, "nodeid":1, "maintenance_mode":"OFF", "role":"RootDisk", "protected":0, "status":"UNKNOWN", "make":null, "reattachable_nodes":[ [ "cscale-82-140.robinsystems.com", "ONLINE" ] ], "capacity":44350570496, "max_latency_sensitive_vols_per_disk":2, "pfree":0, "node_hostname":"cscale-82-140.robinsystems.com", "tags":{ }, "pused":0, "type":"HDD", "nvols":0, "state":"INIT", "reattachpolicy":{ "restarts_done":0, "burst_count":0, "burst_start_time":0, "burst_interval":600, "id":6, "restart_limit":5 }, "max_alloc_slices":32, "stormgrid":0, "free_alloc_slices":32, "slices":0, "availability_zone":null, "max_throughput_intensive_vols_per_disk":1, "model":null, "lused_size":0, "devpath":"\/dev\/disk\/by-id\/dm-uuid-LVM-vI83PDTxV3H0dWyAXfH5ef7rxTOuYyphQObDlS6eMUSpSxH5zsvyg9I5a0Gpuj5W", "alloc_slices":0, "reattachable":0, "max_volumes_per_disk":10, "wwn":"0x600224801d3ac9b6650afd3280aa5898-centos-home", "allocations":[ ], "alloc_score":0, "node_ref":1, "preserved":0 }, { "spf":0.8, "zoneid":1596601846, "dev":"\/dev\/sdb", "aslices":7, "nodeid":1, "maintenance_mode":"OFF", "role":"Storage", "write_unit":4096, "status":"ONLINE", "make":null, "reattachable_nodes":[ [ "cscale-82-140.robinsystems.com", "ONLINE" ] ], "protected":0, "capacity":107374182400, "max_latency_sensitive_vols_per_disk":2, "pfree":104287174656, "node_hostname":"cscale-82-140.robinsystems.com", "tags":{ }, "pused":234881024, "type":"HDD", "nvols":3, "state":"READY", "reattachpolicy":{ "restarts_done":0, "burst_count":0, "burst_start_time":0, "burst_interval":600, "id":2, "restart_limit":5 }, "max_alloc_slices":77, "stormgrid":1, "free_alloc_slices":68, "slices":6390, "availability_zone":null, "max_throughput_intensive_vols_per_disk":1, "model":null, "lused_size":0, "devpath":"\/dev\/disk\/by-id\/scsi-3600224804c48fd7e16c608dea0919064", "alloc_slices":9, "reattachable":0, "max_volumes_per_disk":10, "wwn":"0x600224804c48fd7e16c608dea0919064", "allocations":[ { "vols":[ { "media":"HDD", "pused":167772160, "id":"1", "size":5368709120, "state":"ONLINE", "name":"file-collection-1596578146092.269f9b38-f828-48c2-a382-8921dd74ee53" } ], "volume_group":"file-collection-1596578146092.269f9b38-f828-48c2-a382-8921dd74ee53.72.1.673abece-0975-4234-9fc2-56a06bf54031", "name":"file-collection-1596578146092.269f9b38-f828-48c2-a382-8921dd74ee53.0.970a44c7-a15c-4612-ac57-9b4f15ae386e", "volume":{ "media":"HDD", "pused":167772160, "id":"1", "size":5368709120, "state":"ONLINE", "name":"file-collection-1596578146092.269f9b38-f828-48c2-a382-8921dd74ee53" }, "slices":5 }, { "vols":[ { "media":"HDD", "pused":67108864, "id":"8", "size":1073741824, "state":"ONLINE", "name":"test-RIC-1.server.01.data.1.382f1ad5-1294-4e24-8297-9c6025eacfe5" } ], "volume_group":"test-RIC-1.server.01.72.1.ea297971-f931-4787-99cc-6782e026b77c", "name":"test-RIC-1.server.01.72.1.ea297971-f931-4787-99cc-6782e026b77c.0.1e8feb41-fd42-4409-b8c1-751331febdc1", "volume":{ "media":"HDD", "pused":67108864, "id":"8", "size":1073741824, "state":"ONLINE", "name":"test-RIC-1.server.01.data.1.382f1ad5-1294-4e24-8297-9c6025eacfe5" }, "slices":2 }, { "vols":[ { "media":"HDD", "pused":0, "id":"9", "size":1073741824, "state":"ONLINE", "name":"test-RIC-1.server.01.block.1.1053eaeb-4542-42a5-a173-d69a76703ead" } ], "volume_group":"test-RIC-1.server.01.72.1.1e483fd0-2d5c-434c-aef0-91a87796977a", "name":"test-RIC-1.server.01.72.1.1e483fd0-2d5c-434c-aef0-91a87796977a.0.5bf728c4-ea26-4e0f-82d7-c584fcf0bd9a", "volume":{ "media":"HDD", "pused":0, "id":"9", "size":1073741824, "state":"ONLINE", "name":"test-RIC-1.server.01.block.1.1053eaeb-4542-42a5-a173-d69a76703ead" }, "slices":2 } ], "alloc_score":95, "node_ref":1, "preserved":0 }, { "spf":0.8, "zoneid":1596601846, "dev":"\/dev\/sdc", "aslices":20, "nodeid":1, "maintenance_mode":"OFF", "role":"Storage", "write_unit":4096, "status":"ONLINE", "make":null, "reattachable_nodes":[ [ "cscale-82-140.robinsystems.com", "ONLINE" ] ], "protected":0, "capacity":107374182400, "max_latency_sensitive_vols_per_disk":2, "pfree":103582531584, "node_hostname":"cscale-82-140.robinsystems.com", "tags":{ }, "pused":939524096, "type":"HDD", "nvols":1, "state":"READY", "reattachpolicy":{ "restarts_done":0, "burst_count":0, "burst_start_time":0, "burst_interval":600, "id":3, "restart_limit":5 }, "max_alloc_slices":77, "stormgrid":2, "free_alloc_slices":53, "slices":6390, "availability_zone":null, "max_throughput_intensive_vols_per_disk":1, "model":null, "lused_size":0, "devpath":"\/dev\/disk\/by-id\/scsi-3600224803bcdafde95b1f5cd27ceb5fb", "alloc_slices":24, "reattachable":0, "max_volumes_per_disk":10, "wwn":"0x600224803bcdafde95b1f5cd27ceb5fb", "allocations":[ { "vols":[ { "media":"HDD", "pused":939524096, "id":"16", "size":21474836480, "state":"ONLINE", "name":"rohan-app.nginx.03.data.1.83d03fbf-3bfe-4723-8abe-5cbd51014e0c" } ], "volume_group":"rohan-app.nginx.03.72.1.44251a23-0221-4fda-837e-db26bca3ccb8", "name":"rohan-app.nginx.03.72.1.44251a23-0221-4fda-837e-db26bca3ccb8.0.6e2afb65-5c4c-42e4-972e-161de3fb3856", "volume":{ "media":"HDD", "pused":939524096, "id":"16", "size":21474836480, "state":"ONLINE", "name":"rohan-app.nginx.03.data.1.83d03fbf-3bfe-4723-8abe-5cbd51014e0c" }, "slices":24 } ], "alloc_score":89, "node_ref":1, "preserved":0 } ] } ] } .. raw:: html
Tagging a node =============== Whilst Robin provides host isolation/grouping at a higher level via a construct called ``resource pools`` (more information detailed `here `_), a more granular control is sometimes needed. In order to achieve this Robin allows users to tag hosts with user defined tags which not only allows for separation within a resource pool but also enables the user to take advantage of Robin's advanced application policies and enforce exactly which host(s) an application can be deployed on. This granular control is useful as it allows for on the fly alignment of resources and provide a temporary boundary for resources in comparison to resource pools which are more static in nature. Tags are defined by key-value pairs and need to be registered with Robin before they can be assigned to hosts. The following commands are described in this section: ================================== ================================================================================= ``robin tag add-key`` Register a tag ``robin host add-tags`` Assign a tag to a host ``robin host del-tags`` Unassign a tag from a host ``robin tag del-key`` Unregister a tag ================================== ================================================================================= ===================================== Registering a tag ===================================== .. tabs:: .. tab:: CLI In order to add a tag with Robin such that it can be assigned to a host, issue the following command: .. code-block:: text # robin tag add-key [] [] .. Note:: If a key already exists, the above command can be used to append values for the aforementioned key ============================ ====================================================================================== ``key`` Key to be used for tag ``values`` Space separated list of values to be associated with key ============================ ====================================================================================== **Example:** .. code-block:: text # robin tag add-key color blue red Added key 'color' with values: ['red', 'blue'] .. tab:: API Registers a tag with Robin such that it can be assigned to a host. **End Point:** /api/v3/robin_server/tags/ **Method:** PUT **URL Parameters:** None **Data Parameters:** - ``action: addkey`` - This mandatory field within the payload specifies the add key action is to be performed. - ``key: `` - This mandatory field within the payload specifies the key to be used for the tag. - ``values: `` - This mandatory field within the payload specifies a list of comma seperated strings to be used as the values associated with the aforementioned key. **Port:** RCM Port (default value is 29442) **Headers:** - ``Authorization: `` : Authorization token to identify which user is sending the request. The token can be acquired from the login API. **Success Response Code:** 200 **Error Response Code:** 500 (Internal Server Error), 401 (Unauthorized Error) **Example Response:** .. raw:: html
Output .. code-block:: text { "message":"Added the following values: red, blue for key 'color'" } .. raw:: html
========================== Assigning a tag to a node ========================== .. tabs:: .. tab:: CLI In order to assign one or more tags to a host, issue the following command: .. code-block:: text # robin host add-tags [] [] .. Note:: Only one value for one key can be assigned to each host at any given moment. ============================ ====================================================================================== ``hostname`` FQDN of host ``tags`` Tags to assign in = **Method:** PUT **URL Parameters:** None **Data Parameters:** - ``action: add_tag`` - This mandatory field within the payload specifies the add tag action is to be performed. - ``tags: `` -- - ``: `` - Each key value pair should be the tag's key and a list of comma seperated values already associated with it. An example would be ``"color":["blue"]`` **Port:** RCM Port (default value is 29442) **Headers:** - ``Authorization: `` : Authorization token to identify which user is sending the request. The token can be acquired from the login API. **Success Response Code:** 202 **Error Response Code:** 500 (Internal Server Error), 401 (Unauthorized Error), 404 (Not Found Error), 400 (Invalid API Usage Error) **Example Response:** .. raw:: html
Output .. code-block:: text { "jobid": 27 } .. raw:: html
============================== Unassigning a tag from a node ============================== .. tabs:: .. tab:: CLI In order to unassign one or more tags to a host, issue the following command: .. code-block:: text # robin host del-tags [] [] ============================ ====================================================================================== ``hostname`` FQDN of host ``tags`` Tags to unassign in = format ============================ ====================================================================================== **Example:** .. code-block:: text # robin host del-tags vnode36.robinsystems.com color=blue Job: 81 Name: RemoveTag State: PROCESSED Error: 0 Job: 81 Name: RemoveTag State: COMPLETED Error: 0 .. tab:: API Unassigns one or more tags from a host. **End Point:** /api/v3/robin_server/hosts/ **Method:** PUT **URL Parameters:** None **Data Parameters:** - ``action: del_tag`` - This mandatory field within the payload specifies the delete tag action is to be performed. - ``tags: `` - - ``: `` - Each key value pair should be the tag's key and a list of comma seperated values already associated with it. An example would be ``"color":["blue"]`` **Port:** RCM Port (default value is 29442) **Headers:** - ``Authorization: `` : Authorization token to identify which user is sending the request. The token can be acquired from the login API. **Success Response Code:** 202 **Error Response Code:** 500 (Internal Server Error), 401 (Unauthorized Error), 404 (Not Found Error), 400 (Invalid API Usage Error) **Example Response:** .. raw:: html
Output .. code-block:: text { "jobid": 28 } .. raw:: html
===================================== Unegistering a tag ===================================== .. tabs:: .. tab:: CLI In order to remove a tag from Robin, issue the following command: .. code-block:: text # robin tag del-key [] [] .. Note:: In order to delete a key, all of its associated values must be specified. ============================ ====================================================================================== ``key`` Key of tag to be deleted ``values`` Space separated list of values to be unassociated with the key ============================ ====================================================================================== **Example:** .. code-block:: text # robin tag del-key color blue red Deleted tags with key 'color' for the following values: 'red, blue' .. tab:: API Removes a tag registered with Robin or disassociates certain values from a key. **End Point:** /api/v3/robin_server/tags/ **Method:** PUT **URL Parameters:** None **Data Parameters:** - ``action: delkey`` - This mandatory field within the payload specifies the delete key action is to be performed. - ``key: `` - This mandatory field within the payload specifies the key of the tag to be removed/edited. - ``values: `` - This mandatory field within the payload specifies a list of comma seperated strings to be disassociated with the aforementioned key. If all values associated with the key are specified, the key is removed and the tag is deleted. **Port:** RCM Port (default value is 29442) **Headers:** - ``Authorization: `` : Authorization token to identify which user is sending the request. The token can be acquired from the login API. **Success Response Code:** 200 **Error Response Code:** 500 (Internal Server Error), 401 (Unauthorized Error), 404 (Not Found Error) **Example Response:** .. raw:: html
Output .. code-block:: text { "message":"Deleted tags with key 'color' for the following values: 'blue'" } .. raw:: html
Disabling a node ================= In certain situations, a user might not want any resources (storage or compute) for an application to be allocated from a particular host due to a malfunction with the physical machine or simply because the host is temporarily undergoing maintenance. Instead of requiring the user to remove the node from an existing cluster, Robin allows one to place a host into maintenance mode. This effectively isolates the host with regards to resource availability as it entails that none of the host's storage capacity or compute resources can be used for future application deployment regardless of the Robin roles assigned to the node. This mode can be toggled using the commands detailed below. For more granular control, please review the section on disabling/enabling particular roles `here `_. The following commands are described in this section: ================================== ================================================================================= ``robin host set-maintenance`` Place a host into maintenance mode ``robin host unset-maintenance`` Place a host into non-maintenance (normal) mode ================================== ================================================================================= ===================================== Placing a host into maintenance mode ===================================== .. tabs:: .. tab:: CLI In order to put a host into maintenance and thus temporarily suspend it from providing either storage or compute resources for future application deployments, issue the following command: .. code-block:: text # robin host set-maintenance ============================ ====================================================================================== ``hostname`` FQDN of host ============================ ====================================================================================== **Example:** .. code-block:: text # robin host set-maintenance vnode36.robinsystems.com Host vnode36.robinsystems.com set in maintenance mode .. tab:: API Puts a host into maintenance mode, which in turn temporarily suspends it from providing storage and compute resources for application deployments. **End Point:** /api/v3/robin_server/hosts/ **Method:** PUT **URL Parameters:** None **Data Parameters:** - ``action: set_maintenance`` - This mandatory field within the payload specifies that the set maintenance mode operation is to be performed. **Port:** RCM Port (default value is 29442) **Headers:** - ``Authorization: `` : Authorization token to identify which user is sending the request. The token can be acquired from the login API. **Success Response Code:** 200 **Error Response Code:** 500 (Internal Server Error), 404 (Not Found Error), 401 (Unauthorized Error), 400 (Invalid API Usage Error) **Example Response:** .. raw:: html
Output .. code-block:: text { "message":"Maintenance mode set" } .. raw:: html
========================================= Placing a host into non-maintenance mode ========================================= .. tabs:: .. tab:: CLI In order to revert a host back into its normal setting and thus allow it to provide resources for future application deployments, issue the following command: .. code-block:: text # robin host unset-maintenance ============================ ====================================================================================== ``hostname`` FQDN of host ============================ ====================================================================================== **Example:** .. code-block:: text # robin host unset-maintenance vnode36.robinsystems.com Host vnode36.robinsystems.com out of maintenance mode .. tab:: API Removes a host from maintenance mode, which in turn allows it to provide storage and compute resources for application deployments. **End Point:** /api/v3/robin_server/hosts/ **Method:** PUT **URL Parameters:** None **Data Parameters:** - ``action: unset_maintenance`` - This mandatory field within the payload specifies that the unset maintenance mode operation is to be performed. **Port:** RCM Port (default value is 29442) **Headers:** - ``Authorization: `` : Authorization token to identify which user is sending the request. The token can be acquired from the login API. **Success Response Code:** 200 **Error Response Code:** 500 (Internal Server Error), 404 (Not Found Error), 401 (Unauthorized Error), 400 (Invalid API Usage Error) **Example Response:** .. raw:: html
Output .. code-block:: text { "message":"Maintenance mode unset" } .. raw:: html
Adding a Node ============= You can add new master or worker nodes to an existing Robin CNP HA cluster to scale up your cluster using the GoRobin utility. The option to add a master node is available only if you have initially installed your cluster as a HA cluster. However, for a cluster that you have installed as non-HA, you can add more worker nodes. .. Note:: It is recommended not to add any nodes to your cluster if you have used the option ``--single-node-cluster`` when installing Robin CNP. ============= Prerequisites ============= * Robin CNP installed in HA mode - when master nodes need to be added * Robin CNP admin credentials * Primary master IP address or hostname * ``hosts.json`` file with required master or worker nodes details to add * You must disable ``k8scp_mode`` config attribute if it is enabled before adding new nodes. To disable the k8scp_mode, run the ``robin config update manager k8scp_mode false`` command. * Use the ``config.json`` file with all parameters that you have used during Robin CNP install. .. Note:: You must use the ``hosts.json`` file to add the extra master or worker nodes. **Sample hosts.json file for adding master nodes** .. code-block:: json { "": { "password": "robin123", "role": "master", "user": "root", "port": "22", "primary_master": "True" }, ": { "password": "robin123", "role": "master", "user": "root", "port": "22" } } **Sample hosts.json file for adding worker nodes** .. code-block:: json { "": { "password": "robin123", "role": "master", "user": "root", "port": "22", "primary_master": "True" }, "new_worker_node1": { "password": "robin123", "user": "root", "port": "22" }, "new_worker_node2": { "password": "robin123", "user": "root", "port": "22" } } **Sample config.json file** .. code-block:: json { "vm-2-61.robinsystems.com":{ "robin-install-dir":"/home/custom_robininstall", "robin-backup-dir":"/home/custom_robinbackup", "robindsdir":"/home/custom_robinds", "ip-protocol":"ipv6", "disablerepo":"*", "enablerepo":"robin-repo", "ca-cert-path":"/root/certs/abhi/abhi-inter-ca.crt", "ca-key-path":"/root/certs/abhi/abhi-inter-ca.key", "best-effort-qos": "True", "update-coredns":"True", "topology-manager-policy":"best-effort", "setup-gpu-operator":"True", "nics":"eth1", "reserved-cpus":"0-3", "vault-addr": "https://192.0.2.100:8200", "vault-keys-path": "secret/robin", "vault-ca-cert": "/root/MyRootCA.pem", "vault-client-cert": "/root/robin_tls.pem", "vault-client-key": "/root/robin_tls.key", "kms": "vault", "identity-cert-path": "/root/certs/identity-certs/cluster/cluster-identity.cert", "identity-key-path": "/root/certs/identity-certs/cluster/cluster-identity.key", "identity-ca-path": "/root/certs/identity-certs/ca.crt", "zero-trust":"True", "single-node-cluster":"True", "loadbalancer-iprange":"", "k8s-image-pull-policy":"Never" }, "vm-2-62.robinsystems.com":{ "robin-install-dir":"/home/custom_robininstall", "robin-backup-dir":"/home/custom_robinbackup", "robindsdir":"/home/custom_robinds", "ip-protocol":"ipv6", "disablerepo":"*", "enablerepo":"robin-repo", "nics":"eth1", "reserved-cpus":"0-3" }, "vm-2-63.robinsystems.com":{ "robin-install-dir":"/home/custom_robininstall", "robin-backup-dir":"/home/custom_robinbackup", "robindsdir":"/home/custom_robinds", "ip-protocol":"ipv6", "disablerepo":"*", "enablerepo":"robin-repo", "reserved-cpus":"0-3" }, "vm-2-64.robinsystems.com":{ "robin-install-dir":"/home/custom_robininstall", "robin-backup-dir":"/home/custom_robinbackup", "robindsdir":"/home/custom_robinds", "ip-protocol":"ipv6", "disablerepo":"*", "enablerepo":"robin-repo", "nics":"eth1", "reserved-cpus":"0-3" } } ==================== Adding a Master Node ==================== You can add new master nodes if your cluster has less than three master nodes. When you create a Single Node HA-Ready cluster, you can use this option to add more master nodes. You should use the two JSON files (``hosts.json`` and ``config.json``) when running the following command. Provide the master nodes details in the ``hosts.json`` file and provide the ``config.json`` file containing cluster configuration details. .. Note:: When adding a master or worker node, you must use the ``config.json`` file with all parameters that you have used during Robin CNP install. To add master nodes, run the following command: .. code-block:: text # ./gorobin onprem add-masters --hosts-json --gorobintar | --tar-url --pemfile --robin-admin-user --robin-admin-passwd --config-json **Example** .. code-block:: text # ./gorobin_5.4.3-76 onprem add-masters --hosts-json add_master_host.json --gorobintar gorobintar-5.4.3-76.tar --robin-admin-user admin --robin-admin-passwd Robin123 --ignore-warnings - Checking network connectivity to primary Robin master manager node -> sm-compute02.robinsystems.com ... DONE (0 secs) - Checking number of master nodes ... DONE (0 secs) - Checking network connectivity to host sm-compute03.robinsystems.com ... DONE (0 secs) - Checking vip for master node sm-compute02.robinsystems.com ... DONE (0 secs) - Running GoRobin Precheck on host sm-compute03.robinsystems.com ... DONE (0 secs) This step will remove any existing Robin tars and re-copy new Robin tars from /tmp/ folder on all nodes. Are you sure you want to proceed (y/n) ? y - Removing ROBIN tarball from '1' node(s) in the cluster ... DONE (0 secs) - DONE (333 secs)all hosts: 100% -- (10096846420|10096846420) ... File upload to all hosts: 0% -- (32768|10096846420) - Running Precheck on host sm-compute03.robinsystems.com ... WARNING (16 secs) - Precheck on this host had warnings. Please check /tmp//sm-compute03.robinsystems.com_precheck_20221223-043308 for details. - Executing hostname ping checks for all nodes in the cluster ... DONE (0 secs) - Checking time drift between all the nodes ... DONE (0 secs) - Installing host packages on '1' node(s) in the cluster. You may check /var/log/robin-host-script.log on each host to track progress ... DONE (421 secs) - Copying kubeconfig file to all nodes ... DONE (2 secs) - Adding '1' additional master node(s) 'sm-compute03.robinsystems.com' to cluster. You may check /var/log/robin-k8s-script.log on the host. ... DONE (90 secs) - Adding db replicas on nodes sm-compute03.robinsystems.com ... DONE (15 secs) - Waiting while nodes are being added to the Robin cluster ... DONE (50 secs) - Validating Installation ... DONE (0 secs) - Initializing Compute and Storage services on 1 node(s) ... DONE (105 secs) ----------------------------------------------------------------- Node(s) sm-compute03.robinsystems.com is ready for use 1. sm-compute03.robinsystems.com Robin Admin Username ... admin Robin Admin Access ..... https://192.0.2.100 ----------------------------------------------------------------- ROBIN was installed on the following hosts which had precheck warnings: sm-compute03.robinsystems.com. This is due to the '--ignore-warnings' flag being passed during the installation. This might lead to erroneous behavior and hence an unsupported installation. - Removing ROBIN tarball from '1' node(s) at /tmp/ in the cluster ... DONE (0 secs) - Pulling ROBIN Install logs from '1' node(s) at /tmp/ ... DONE (0 secs) ==================== Adding a Worker Node ==================== You can add a worker node to an existing Robin CNP cluster when required to scale up the cluster. .. Note:: You cannot add worker nodes to an existing Robin CNP cluster if you have an existing cluster where you have used the ``single-node-cluster`` option. However, you can add more worker nodes if you have a non-HA setup. You should use the two JSON files (``hosts.json`` and ``config.json``) when running the following command. Provide the master nodes details in the ``hosts.json`` file and provide the ``config.json`` file containing cluster configuration details. .. Note:: When adding a master or worker node, you must use the ``config.json`` file with all parameters that you have used during Robin CNP install. To add worker nodes, run the following command: .. code-block:: text # ./gorobin onprem add-workers --hosts-json --gorobintar | --tar-url --pemfile --robin-admin-user --robin-admin-passwd --config-json **Example** .. code-block:: text # ./gorobin_5.4.3-76 onprem add-workers --hosts-json host.json --gorobintar gorobintar-5.4.3-76.tar --robin-admin-user admin --robin-admin-passwd Robin123 --ignore-warnings - Checking network connectivity to primary Robin master manager node -> hypervvm-63-40.robinsystems.com ... DONE (0 secs) - Checking network connectivity to host hypervvm-63-41.robinsystems.com ... DONE (0 secs) - Checking vip for master node hypervvm-63-40.robinsystems.com ... DONE (0 secs) - Running GoRobin Precheck on host hypervvm-63-41.robinsystems.com ... DONE (0 secs) This step will remove any existing Robin tars and re-copy new Robin tars from /tmp/ folder on all nodes. Are you sure you want to proceed (y/n) ? y - Removing ROBIN tarball from '1' node(s) in the cluster ... DONE (0 secs) - DONE (733 secs)all hosts: 100% -- (10096846420|10096846420) 6420) ile upload to all hosts: 0% -- (32768|10096846420) - Running Precheck on host hypervvm-63-41.robinsystems.com ... WARNING (34 secs) - Precheck on this host had warnings. Please check /tmp//hypervvm-63-41.robinsystems.com_precheck_20221223-104617 for details. - Executing hostname ping checks for all nodes in the cluster ... DONE (0 secs) - Checking time drift between all the nodes ... DONE (0 secs) - Installing host packages on '1' node(s) in the cluster. You may check /var/log/robin-host-script.log on each host to track progress ... DONE (1054 secs) - Copying kubeconfig file to all nodes ... DONE (2 secs) - Adding '1' additional agent node(s) 'hypervvm-63-41.robinsystems.com' to cluster. You may check /var/log/robin-k8s-script.log on the host ... DONE (60 secs) - Waiting while nodes are being added to the Robin cluster ... DONE (87 secs) - Validating Installation ... DONE (0 secs) - Initializing Compute and Storage services on 1 node(s) ... DONE (46 secs) ----------------------------------------------------------------- Node(s) hypervvm-63-41.robinsystems.com is ready for use 1. hypervvm-63-41.robinsystems.com Robin Admin Username ... admin Robin Admin Access ..... https://hypervvm-63-40.robinsystems.com ----------------------------------------------------------------- ROBIN was installed on the following hosts which had precheck warnings: hypervvm-63-41.robinsystems.com. This is due to the '--ignore-warnings' flag being passed during the installation. This might lead to erroneous behavior and hence an unsupported installation. - Removing ROBIN tarball from '1' node(s) at /tmp/ in the cluster ... DONE (0 secs) - Pulling ROBIN Install logs from '1' node(s) at /tmp/ ... DONE (0 secs) Remove a Worker or Master node =============================== You might need to remove a worker node or Master node from your cluster if the node malfunctioned for any reason and replace it with a new one. You must ensure that a Robin HA cluster must have three master nodes at all times. **Prerequisites** The following are the prerequisites to remove a worker or master node: - Move all pods from the node you plan to remove to another healthy node on the cluster. You can use the ``robin instance relocate`` command to move. For more information, see `here `__ - Move all volumes from the node you plan to remove to drives residing on other healthy nodes. Use the ``robin drive evacuate`` command. For more information, see `here `__ - Move all Kubernetes pods from the node you plan to another node by running the ``kubectl drain --ignore-daemonsets `` command. For more information, see `here `__. The following are the high-level steps for removing a Worker node or Master node: - `Step 1 - Place host in maintenance mode `__ - `Step 2 - Remove assigned node role `__ - `Step 3 - Remove host from Robin cluster `__ - `Step 4 - Run k8s Script `__ - `Step 5 - Delete Patroni Pod and the corresponding PV and PVC `__ - `Step 6 - Delete node from the Kubernetes cluster `__ - `Step 7 - Run host script `__ =========================================== Step 1 - Place host in maintenance mode =========================================== You need to place a node in the maintenance mode to disable all roles assigned to it. After putting the node in the maintenance mode, no other applications or volumes can be provisioned on the host. To put the node in the maintenance mode, run the following command: .. code-block:: text # robin host set-maintenance **Example:** .. code-block:: text # robin host set-maintenance vnode36.robinsystems.com Host vnode36.robinsystems.com set in maintenance mode ==================================== Step 2 - Remove assigned node role ==================================== You must first remove any assigned node role from the required node before removing a node from the cluster. A node generally has storage and compute roles. To remove an assigned role from the node, complete the following steps: 1. Log in to one of the master nodes and run the following command to view the list of nodes in a cluster, and find the node name that you want to remove. .. code-block:: text robin host list **Example** .. code-block:: text # robin host list Id | Hostname | Version | Status | RPool | Avail. Zone | LastOpr | Roles | Cores | GPUs | Mem | HDD(#/Alloc/Total) | SSD(#/Alloc/Total) | Pod Usage | Joined Time -------------+-----------------------------+----------+--------+---------+-------------+---------+-------+-----------+-------+----------------+--------------------+--------------------+-----------+---------------------- 1663838470:1 | rakuten-12.robinsystems.com | 5.4.1-21 | Ready | default | N/A | ONLINE | S,C | 124/4/128 | 0/0/0 | 974G/33G/1007G | -/-/- | 6/5G/17884G | 76/24/100 | 21 Sep 2022 19:23:02 1663838470:2 | rakuten-14.robinsystems.com | 5.4.1-21 | Ready | default | N/A | ONLINE | S,C | 123/5/128 | 0/0/0 | 972G/34G/1007G | -/-/- | 7/5G/20865G | 71/29/100 | 21 Sep 2022 19:23:53 1663838470:3 | rakuten-15.robinsystems.com | 5.4.1-21 | Ready | default | N/A | ONLINE | S,C | 123/5/128 | 0/0/0 | 973G/33G/1007G | -/-/- | 7/-/20865G | 72/28/100 | 21 Sep 2022 19:24:43 * Note: all values indicated above in the format XX/XX/XX represent the Free/Allocated/Total values of the respective resource unless otherwise specified. In addition allocated values for compute resource such as cpu, memory and pod usage includes reserved values for the corresponding resource. 2. Run the following command to remove the role for the required node. .. code-block:: text robin host remove-role storage,compute -–wait **Example** .. code-block:: text # robin host remove-role rakuten-15.robinsystems.com storage,compute --wait Are you sure you want to remove the role(s) 'storage,compute' from host 'rakuten-15.robinsystems.com' [y/n] ? y Job: 117 Name: HostRemoveRoles State: PROCESSED Error: 0 Job: 117 Name: HostRemoveRoles State: WAITING Error: 0 Job: 117 Name: HostRemoveRoles State: COMPLETED Error: 0 3. Run the ``robin host list`` command to verify that roles are removed for the node. **Example** .. code-block:: text # robin host list Id | Hostname | Version | Status | RPool | Avail. Zone | LastOpr | Roles | Cores | GPUs | Mem | HDD(#/Alloc/Total) | SSD(#/Alloc/Total) | Pod Usage | Joined Time -------------+-----------------------------+----------+--------+---------+-------------+---------+-------+-----------+-------+----------------+--------------------+--------------------+-----------+---------------------- 1663838470:1 | rakuten-12.robinsystems.com | 5.4.1-21 | Ready | default | N/A | ONLINE | S,C | 124/4/128 | 0/0/0 | 974G/33G/1007G | -/-/- | 6/5G/17884G | 76/24/100 | 21 Sep 2022 19:23:02 1663838470:2 | rakuten-14.robinsystems.com | 5.4.1-21 | Ready | default | N/A | ONLINE | S,C | 123/5/128 | 0/0/0 | 972G/34G/1007G | -/-/- | 7/5G/20865G | 71/29/100 | 21 Sep 2022 19:23:53 1663838470:3 | rakuten-15.robinsystems.com | 5.4.1-21 | Ready | default | N/A | SYNCED | | 123/5/128 | 0/0/0 | 1001G/5G/1007G | -/-/- | -/-/- | 72/28/100 | 21 Sep 2022 19:24:43 * Note: all values indicated above in the format XX/XX/XX represent the Free/Allocated/Total values of the respective resource unless otherwise specified. In addition allocated values for compute resource such as cpu, memory and pod usage includes reserved values for the corresponding resource ========================================= Step 3 - Remove host from Robin cluster ========================================= After you remove the assigned roles from the node, you must remove the host from the Robin cluster. To remove the host, complete the following steps: 1. Run the following command to remove the host. .. code-block:: text robin host remove –wait **Example** .. code-block:: text # robin host remove rakuten-15.robinsystems.com Are you sure you want to delete [y/n] ? y Submitted job '129'. Use 'robin job wait 129' to track the progress # robin job wait 129 Job: 129 Name: HostRemove State: COMPLETED Error: 0 2. Run the ``robin host list`` command to confirm the required host is removed from the Robin Cluster. After removing the host, you must delete the node from the Kubernetes cluster. ================================================= Step 4 - Run k8s-script ================================================= Run the k8s-script on the node you are removing to remove Kubernetes from it. .. Note:: You can find the k8s-script at this location on your cluster: `/tmp/gorobintar`. .. code-block:: text ./k8s-script-el7.sh cleanup --force -y **Example** .. code-block:: text [root@asa-02 gorobintar]# ./k8s-script-el7.sh cleanup --force -y Robin K8s Cleanup Extracting Payload : DONE Cleaning up Kubernetes : DONE Removing Host Packages : DONE Successfully cleaned up kubernetes node ================================================================================ Step 5 - Delete Patroni Pod and the corresponding PV and PVC (Only Master Node) ================================================================================ This step is required only when removing the master node. As part of this step, you need first discover the Patroni Pod and the corresponding PV and PVC for Pod. After discovering the Patroni Pod and corresponding PV and PVC, you need to delete them in the following order: Patroni Pod, PVC, and finally PV. .. Note:: You must make a note of the Patroni Pod and its corresponding PV and PVC names when performing the following steps. 1. Run the following command to know the Patroni Pod on the Master node that you want to delete. .. code-block:: text kubectl get pods -n robinio -o wide | grep patroni You can notice that the corresponding Patroni Pod to the Master node that you are deleting will be in the `Terminating` or `Pending` Status. .. Important:: Make a note of the Patroni Pod name that is in the ``Terminating`` or ``Pending`` status. **Example** .. code-block:: text [root@asa-01 K8S_DOWNLOAD]# kubectl get pods -n robinio -o wide | grep patroni robin-patroni-0 1/1 Running 0 25h 172.21.76.68 asa-01 robin-patroni-1 1/1 Terminating 0 4h 172.21.84.132 asa-02 robin-patroni-2 1/1 Running 0 4h 172.21.70.194 asa-03 robin-patroni-postgres-operator-7c6775c4bb-vl6gd 1/1 Running 0 25h 172.21.76.67 asa-01 2. Run the following command to find the PVC name for the Patroni Pod you want to delete. .. code-block:: kubectl get pods -n robinio -o jsonpath={.spec.volumes[0].persistentVolumeClaim.claimName} .. Important:: Make a note of the PVC name from the command output. 3. Run the following command to find the corresponding PV name for the Patroni Pod you want to delete. .. Note:: Use the PVC name that you have got from Step 2. .. code-block:: kubectl get pv | grep .. Important:: Make a note of the PV name from the command output. 4. Run the following command to delete the Patroni Pod in the ``Terminating`` or ``Pending`` status. .. Note:: Use the Patroni Pod name that you noted in **Step 1**, which is in the Terminating or Pending status. .. code-block:: kubectl delete pod -n robinio **Example** .. code-block:: [root@asa-01 K8S_DOWNLOAD]# kubectl delete pod -n robinio robin-patroni-1 5. Run the following command to delete PVC. .. Note:: Use the PVC name that you noted in Step 2. .. code-block:: kubectl delete pvc -n robinio **Example** .. code-block:: [[root@asa-01 K8S_DOWNLOAD]# kubectl delete pvc -n robinio pgdata-robin-patroni-1 persistentvolumeclaim "pgdata-robin-patroni-1" deleted 6. Run the following command to delete PV. .. code-block:: kubectl delete pv **Example** .. code-block:: [root@asa-01 K8S_DOWNLOAD]# kubectl delete pv robin-patroni-pv-1 persistentvolume "robin-patroni-pv-1" deleted ================================================= Step 6 - Delete node from the Kubernetes cluster ================================================= After removing the host from the Robin cluster, you must delete the corresponding Kubernetes node from the Kubernetes cluster. To delete a node from the Kubernetes, cluster complete the following steps: 1. Run the following command to view the list of Kubernetes nodes. Make a note of the node name that you need to delete from the list. .. code-block:: text kubectl get nodes **Example** .. code-block:: text # kubectl get nodes NAME STATUS ROLES AGE VERSION rakuten-12.robinsystems.com Ready control-plane,master 115m v1.23.8 rakuten-14.robinsystems.com Ready control-plane,master 114m v1.23.8 rakuten-15.robinsystems.com Ready control-plane,master 114m v1.23.8 2. Run the following command to delete the required nodes from the Kubernetes cluster. .. Note:: You need to cordon the node if the node is online. .. code-block:: text kubectl delete node **Example** .. code-block:: text # kubectl delete node rakuten-15.robinsystems.com node "rakuten-15.robinsystems.com" deleted 3. Run the ``kubectl get nodes`` command to confirm that node is deleted from the Kubernetes cluster. You should not see the deleted node in the list. After deleting the Kubernetes node, you must remove the deleted node from the ETCD cluster ========================== Step 7 - Run Host Script ========================== Run the host script on the node you are removing to clean it up. .. Note:: You can find the host script at this location on your cluster: `/tmp/gorobintar`. .. code-block:: ./host-script-el7.sh uninstall -y .. code-block:: [root@asa-02 gorobintar]# ./host-script-el7.sh uninstall -y Robin Host Uninstall Checking Tar... : DONE Extracting Payload : DONE Cleaning up CRI : DONE Cleaning up Host : DONE Cleaning up Runtimes : DONE Removing Host Packages : DONE Successfully uninstalled host .. Decommissioning a node ====================== .. When a server physically malfunctions or needs to be replaced, one has to remove the node from its respective Robin and Kubernetes clusters. Detailed below is a step-by-step walkthrough which showcases how to achieve this, whilst also ensuring your Robin cluster continues to function normally. .. **Setting a host to maintenance mode:** .. Before a host can be removed from the Robin cluster it is good practice to set it to maintenance mode. This disables all roles on the host for the time being and is important as it ensures no other applications or volumes can be provisioned on the host to be removed. This in turn makes the following steps of the walkthrough much easier to perform and results in a smoother removal of the node. In order to set a host to maintenance mode use the ``robin host set-maintenance`` command. More details about this command can be found `here `_. .. .. code-block:: text .. # robin host set-maintenance intel-1.robinsystems.com Host intel-1.robinsystems.com set in maintenance mode .. **Removing roles from a host:** .. Before a host can be removed from the Robin cluster all the roles currently assigned to it must be removed. Detailed below are the different preconditions that need to be met before removing a particular role. .. If the host in question has the Compute role assigned to it, all pods from this host will have to be relocated to other hosts in the cluster. This can be achieved by running the ``robin instance relocate`` command for all the Vnodes that are currently residing on the host. More details about this command can be found `here `_. The reason for this is that the Compute role denotes that resources such as CPU and memory can be allocated from this host. As a result in order to remove the role no compute resources should be taken from the host. This is the resulting consequence of moving the respective pods over. .. .. code-block:: text .. # robin instance list --host intel-1.robinsystems.com ID | Owner/Tenant | ResPool | Container | Hostname | IP Addresses | Status | Autopilot | LastOpr | Host | Engine | Cores | GPUs | Mem (GB) | Ctime ---+----------------------+---------+--------------+---------------------------------------------+----------------+--------+-----------+---------+---------+--------+-------+------+----------+---------------------- 1 | robin/Administrators | default | a1.server.01 | a1-server-01.t001-u000003.svc.cluster.local | 172.21.17.3/16 | ONLINE | Enabled | STARTED | intel-1 | docker | 1 | 0 | 0.38 | 27 Feb 2020 13:40:13 # robin instance relocate a1.server.01 --wait --yes Job: 63 Name: VnodeDeploy State: PROCESSED Error: 0 Job: 63 Name: VnodeDeploy State: WAITING Error: 0 Job: 63 Name: VnodeDeploy State: AGENT_WAIT Error: 0 Job: 63 Name: VnodeDeploy State: FINALIZED Error: 0 Job: 63 Name: VnodeDeploy State: COMPLETED Error: 0 .. # robin instance list ID | Owner/Tenant | ResPool | Container | Hostname | IP Addresses | Status | Autopilot | LastOpr | Host | Engine | Cores | GPUs | Mem (GB) | Ctime ---+----------------------+---------+--------------+---------------------------------------------+----------------+--------+-----------+---------+--------------+--------+-------+------+----------+---------------------- 1 | robin/Administrators | default | a1.server.01 | a1-server-01.t001-u000003.svc.cluster.local | 172.21.17.3/16 | ONLINE | Enabled | STARTED | cscale-82-83 | docker | 1 | 0 | 0.38 | 27 Feb 2020 13:40:13 .. If the host in question has the Storage role assigned to it, all volumes that are currently allocated on drives which belong to that host must be evacuated to drives residing on other hosts. This can be achieved by running the ``robin drive evacuate`` command. More details about this command can be found `here `_. The reason for this is that the Storage role denotes that the host is available to provide storage capacity for volumes that are created alongisde applications. As a result, in order to remove the role there must be no volume allocations tied with the host. This is the resulting consequence of evacuating all the volumes from each drive on the node. .. code-block:: text # robin drive list --host intel-1.robinsystems.com ID | WWN | Host | Path /dev/disk/by-id | Size(GB) | Movable | Type | Free/Max(GB) | Vols | Role | Status | LastOpr ---+-------------------------------------------+---------+-----------------------------------------------+----------+---------+------+--------------+------+---------+--------+--------- 3 | 0xQEMU_QEMU_HARDDISK_e54d6149-0a4e-48ce-b | intel-1 | scsi-0QEMU_QEMU_HARDDISK_e54d6149-0a4e-48ce-b | 100 | N | HDD | 63/77 (82%) | 2/10 | Storage | ONLINE | READY 4 | 0xQEMU_QEMU_HARDDISK_89fc0488-2050-4f44-a | intel-1 | scsi-0QEMU_QEMU_HARDDISK_89fc0488-2050-4f44-a | 100 | N | HDD | 77/77 (100%) | 0/10 | Storage | ONLINE | READY Only storage disks are shown. Issue `robin disk list --role all` to view all disks # robin drive evacuate 0xQEMU_QEMU_HARDDISK_e54d6149-0a4e-48ce-b --exclude-disks 0xQEMU_QEMU_HARDDISK_e54d6149-0a4e-48ce-b, 0xQEMU_QEMU_HARDDISK_89fc0488-2050-4f44-a --wait --yes Job: 65 Name: DiskEvacuate State: VALIDATED Error: 0 Job: 65 Name: DiskEvacuate State: WAITING Error: 0 Job: 65 Name: DiskEvacuate State: COMPLETED Error: 0 # robin drive list --host intel-1.robinsystems.com ID | WWN | Host | Path /dev/disk/by-id | Size(GB) | Movable | Type | Free/Max(GB) | Vols | Role | Status | LastOpr ---+-------------------------------------------+---------+-----------------------------------------------+----------+---------+------+--------------+------+---------+--------+--------- 3 | 0xQEMU_QEMU_HARDDISK_e54d6149-0a4e-48ce-b | intel-1 | scsi-0QEMU_QEMU_HARDDISK_e54d6149-0a4e-48ce-b | 100 | N | HDD | 77/77 (100%) | 0/10 | Storage | ONLINE | READY 4 | 0xQEMU_QEMU_HARDDISK_89fc0488-2050-4f44-a | intel-1 | scsi-0QEMU_QEMU_HARDDISK_89fc0488-2050-4f44-a | 100 | N | HDD | 77/77 (100%) | 0/10 | Storage | ONLINE | READY If the host in question has the Manager role assigned to it, there are no explicit preconditions that need to be met. However we recommend that for high availability clusters that there are at least 2 nodes with the Manager role assigned to them at all times. This is because if the master Manager node does fail or is rebooted, a cluster failover can occur and the Robin cluster is not affected. Once all the necessary conditions have been met, the roles can be removed as shown in the following example: .. code-block:: text # robin host list Id | Hostname | Version | Status | LastOpr | Resource Pool | Roles | Cores | GPUs | Mem(Free/Alloc/Total) | HDD(#/Alloc/Total) | SSD(#/Alloc/Total) | Instances | Joined Time -------------+-------------------------------+------------+--------+---------+---------------+-------+-------+------+-----------------------+--------------------+--------------------+-----------+---------------------- 1582820722:1 | cscale-82-81.robinsystems.com | 5.2.1-9769 | Ready | ONLINE | default | M* | 2/400 | 0/0 | 30G/1G/31G | -/-/- | -/-/- | 0 | 27 Feb 2020 00:25:46 1582820722:2 | cscale-82-82.robinsystems.com | 5.2.1-9769 | Ready | ONLINE | default | M | 1/400 | 0/0 | 30G/1G/31G | -/-/- | -/-/- | 0 | 27 Feb 2020 00:32:47 1582820722:3 | cscale-82-83.robinsystems.com | 5.2.1-9769 | Ready | ONLINE | default | M | 1/400 | 0/0 | 30G/1G/31G | -/-/- | -/-/- | 0 | 27 Feb 2020 00:41:56 1582820722:4 | intel-1.robinsystems.com | 5.2.1-9769 | Ready | ONLINE | default | S,C | 1/720 | 0/0 | 175G/12G/187G | 2/-/200G | -/-/- | 0 | 27 Feb 2020 00:53:35 # robin host remove-role intel-1.robinsystems.com storage,compute --yes --wait Job: 208 Name: HostRemoveRoles State: VALIDATED Error: 0 Job: 208 Name: HostRemoveRoles State: WAITING Error: 0 Job: 208 Name: HostRemoveRoles State: COMPLETED Error: 0 # robin host list Id | Hostname | Version | Status | LastOpr | Resource Pool | Roles | Cores | GPUs | Mem(Free/Alloc/Total) | HDD(#/Alloc/Total) | SSD(#/Alloc/Total) | Instances | Joined Time -------------+-------------------------------+------------+--------+---------+---------------+-------+-------+------+-----------------------+--------------------+--------------------+-----------+---------------------- 1582820722:1 | cscale-82-81.robinsystems.com | 5.2.1-9769 | Ready | ONLINE | default | M* | 2/400 | 0/0 | 30G/1G/31G | -/-/- | -/-/- | 0 | 27 Feb 2020 00:25:46 1582820722:2 | cscale-82-82.robinsystems.com | 5.2.1-9769 | Ready | ONLINE | default | M | 1/400 | 0/0 | 30G/1G/31G | -/-/- | -/-/- | 0 | 27 Feb 2020 00:32:47 1582820722:3 | cscale-82-83.robinsystems.com | 5.2.1-9769 | Ready | ONLINE | default | M,C | 1/400 | 0/0 | 30G/1G/31G | -/-/- | -/-/- | 0 | 27 Feb 2020 00:41:56 1582820722:4 | intel-1.robinsystems.com | 5.2.1-9769 | Ready | SYNCED | default | | 1/720 | 0/0 | 187G/0.05G/187G | -/-/- | -/-/- | 0 | 27 Feb 2020 00:53:35 **Removing the host:** Once all the the roles are removed from a host, issue the following command to remove the host from a Robin cluster: .. code-block:: text # robin host remove [] --force --yes ============================ ====================================================================================== ``host`` FQDN of host ``--force`` Forcibly remove a host from a cluster. Required if removing a node that is down ``--yes`` Do not prompt the user for confirmation of removal ============================ ====================================================================================== **Example:** .. code-block:: text # robin host list Id | Hostname | Version | Status | LastOpr | Resource Pool | Roles | Cores | GPUs | Mem(Free/Alloc/Total) | HDD(#/Alloc/Total) | SSD(#/Alloc/Total) | Instances | Joined Time -------------+-------------------------------+------------+--------+---------+---------------+-------+-------+------+-----------------------+--------------------+--------------------+-----------+---------------------- 1582820722:1 | cscale-82-81.robinsystems.com | 5.2.1-9769 | Ready | ONLINE | default | M* | 2/400 | 0/0 | 30G/1G/31G | -/-/- | -/-/- | 0 | 27 Feb 2020 00:25:46 1582820722:2 | cscale-82-82.robinsystems.com | 5.2.1-9769 | Ready | ONLINE | default | M | 1/400 | 0/0 | 30G/1G/31G | -/-/- | -/-/- | 0 | 27 Feb 2020 00:32:47 1582820722:3 | cscale-82-83.robinsystems.com | 5.2.1-9769 | Ready | ONLINE | default | M | 1/400 | 0/0 | 30G/1G/31G | -/-/- | -/-/- | 0 | 27 Feb 2020 00:41:56 1582820722:4 | intel-1.robinsystems.com | 5.2.1-9769 | Ready | ONLINE | default | S,C | 1/720 | 0/0 | 175G/12G/187G | 2/-/200G | -/-/- | 0 | 27 Feb 2020 00:53:35 # kubectl get nodes NAME STATUS ROLES AGE VERSION cscale-82-81 Ready master 21h v1.16.3 cscale-82-82 Ready master 21h v1.16.3 cscale-82-83 Ready master 21h v1.16.3 intel-1 Ready worker 21h v1.16.3 # robin host remove intel-1.robinsystems.com --yes --wait Job: 215 Name: HostRemove State: VALIDATED Error: 0 Job: 215 Name: HostRemove State: WAITING Error: 0 Job: 215 Name: HostRemove State: COMPLETED Error: 0 # robin host list Id | Hostname | Version | Status | LastOpr | Resource Pool | Roles | Cores | GPUs | Mem(Free/Alloc/Total) | HDD(#/Alloc/Total) | SSD(#/Alloc/Total) | Instances | Joined Time -------------+-------------------------------+------------+--------+---------+---------------+-------+-------+------+-----------------------+--------------------+--------------------+-----------+---------------------- 1582820722:1 | cscale-82-81.robinsystems.com | 5.2.1-9769 | Ready | ONLINE | default | M* | 2/400 | 0/0 | 30G/1G/31G | -/-/- | -/-/- | 0 | 27 Feb 2020 00:25:46 1582820722:2 | cscale-82-82.robinsystems.com | 5.2.1-9769 | Ready | ONLINE | default | M | 1/400 | 0/0 | 30G/1G/31G | -/-/- | -/-/- | 0 | 27 Feb 2020 00:32:47 1582820722:3 | cscale-82-83.robinsystems.com | 5.2.1-9769 | Ready | ONLINE | default | M | 1/400 | 0/0 | 30G/1G/31G | -/-/- | -/-/- | 0 | 27 Feb 2020 00:41:56 # kubectl get nodes NAME STATUS ROLES AGE VERSION cscale-82-81 Ready master 21h v1.16.3 cscale-82-82 Ready master 21h v1.16.3 cscale-82-83 Ready master 21h v1.16.3 Managing a cluster via the remote client ========================================= In addition to the Robin CLI, which is available on all hosts where Robin is installed, a remote client is shipped with each cluster that is deployed. This client mirrors the functionality of the native CLI with regards to the commands available and hence it provides the management capabilities that are described throughout this document. One advantage of utilizing this client is that it can be used to manage a multitude of Robin clusters via the concept of ``contexts``. A ``context`` in this scenario refers to a Robin cluster and is identified by the server name or IP Address. In addition to this primary key, the following attributes can also be set within a ``context``: the port values for various Robin services (including the Robin Server, File Server, Event Server, Watchdog Server, and Metrics Server) along with the logging level. The attributes are discussed in more detail in the following sections. After creating the appropriate ``context`` for a Robin cluster, one can set it to be the current context and communicate with the respective cluster. The commands which can be used to achieve this are described below. The following commands are described in this section: ================================ ================================================================================= ``robin client add-context`` Add a Robin cluster context ``robin client list-contexts`` List all registered Robin cluster contexts ``robin client set-current`` Set a Robin cluster context as the current context ``robin client update-context`` Update attributes for the current Robin cluster context ``robin client delete-context`` Delete a Robin cluster context ================================ ================================================================================= ============================= Downloading the Robin client ============================= In order to download the Robin client from an existing Robin cluster, issue the following command: .. code-block:: text # curl -k https://:/api/v3/robin_server/download?file=robincli&os= -o robin ============================ ====================================================================================== ``master_ip`` IP Address of the Master Node or VIP ``port`` Port number for the Robin Server ``os`` The operating system to download the client for. Supported operating systems include: Linux, MacOS. ============================ ====================================================================================== **Example**: .. code-block:: text # curl -k 'https://vnode42:29442/api/v3/robin_server/download?file=robincli&os=linux' -o robin % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 100 10.1M 100 10.1M 0 0 1421k 0 0:00:07 0:00:07 --:--:-- 1483k # ls -lart -rw-r--r-- 1 demo staff 10655536 Mar 26 14:12 robin ============================= Adding a Context ============================= .. tabs:: .. tab:: CLI A context is a construct that can be used to define a Robin cluster in a manner that the remote client can understand. In order to add a context, issue the following command: .. Note:: If a context already exists with the server specified, that context will be updated with the values supplied. .. code-block:: text # robin client add-context --port --file-port --event-port --watchdog-port --metrics-port --log-level --product --set-current =================================== ====================================================================================== ``server`` FQDN/IP Address of the Master Node or VIP ``--port `` Port number for the Robin Server. Default value is 29442 ``--file-port `` Port number for the File Server. Default value is 29445 ``--event-port `` Port number for the Event Server. Default value is 29449 ``--watchdog-port `` Port number for the Watchdog Server. Default value is 29444 ``--metrics-port `` Port number for the Metrics Server. Default is 29446 ``--log-level `` Number indicating the verbosity of logs. Valid values are 10 (DEBUG), 20 (INFO), 40 (ERROR). Default value is 40. ``--product `` Type of ROBIN installation. Valid choices are 'platform' or 'storage'. Default value is 'platform'. ``--set-current`` Set context to be created as the current =================================== ====================================================================================== .. Note:: If the target Robin cluster was deployed as a highly available cluster, ensure that the ``robincp_mode`` config attribute is enabled and set the port value for the Robin, file and event server to 29465. In addition the ``server`` parameter should be set to the value of the VIP in this case. Otherwise the remote client will not be fully operational. **Example**: .. code-block:: text # robin client add-context centos-60-214 --port 29442 Context robin-cluster-centos-60-214 created successfully ============================== Listing all available contexts ============================== .. tabs:: .. tab:: CLI In order to list all contexts that have already been registered with the client alongside additional details such as the port values specified or the log level, issue the following command: .. code-block:: text # robin client list-contexts --full ============================ ====================================================================================== ``--full`` Show additional details about all registered contexts ============================ ====================================================================================== **Example**: .. code-block:: text # robin client list-contexts --full | Server | Port | Version | Tenant | Last Login | Tenants | FPort | WPort | MPort | LogLevel ---+-----------------------------------+-------+------------+----------------+----------------------+----------------+-------+-------+-------+---------- | master.robin-server.service.robin | 29442 | - | - | - | | 29445 | 29444 | 29446 | ERR | centos-60-214 | 29443 | - | Administrators | - | | 29445 | 29444 | 29446 | ERR * | 172.19.174.194 | 29442 | 5.2.3-9842 | Administrators | 26 Mar 2020 16:10:58 | Administrators | 29445 | 29444 | 29446 | ERR .. Note:: The asterisk displayed above indicates the current context. ============================ Setting the current context ============================ .. tabs:: .. tab:: CLI In order to access a particular Robin cluster, its respective context needs to be set as the current context. To achieve this, issue the following command: .. code-block:: text # robin client set-current ============================ ====================================================================================== ``context`` The server attribute of the context to be set as current ============================ ====================================================================================== **Example**: .. code-block:: text # robin client set-current centos-60-214 Current context set to robin-cluster-centos-60-214 ============================ Updating the current context ============================ .. tabs:: .. tab:: CLI In certain situations, such as a reinstallation, the attributes of a context might be altered whilst retaining the same server IP Address or hostname. As a result, the context which refers to this cluster will have to be updated. In order to do so, issue the following command: .. Note:: The below command only updates the current context. .. code-block:: text # robin client update-context --port --file-port --event-port --watchdog-port --metrics-port --log-level =================================== ====================================================================================== ``--port `` Updated port number for the Robin Server ``--file-port `` Updated port number for the File Server ``--event-port `` Updated port number for the Event Server ``--watchdog-port `` Updated port number for the Watchdog Server ``--metrics-port `` Updated port number for the Metrics Server ``--log-level `` Updated number indicating the verbosity of logs. Valid values are 10 (DEBUG), 20 (INFO), 40 (ERROR) =================================== ====================================================================================== **Example**: .. code-block:: text # robin client update-context --port 29942 --file-port 29445 --watchdog-port 29444 --metrics-port 29446 Updating attributes for context robin-cluster-centos-60-214 Server: centos-60-214 Context config updated for robin-cluster-centos-60-214 ====================== Deleting a context ====================== .. tabs:: .. tab:: CLI In order to remove a registered context, issue the following command: .. code-block:: text # robin client delete-context ============================ ====================================================================================== ``context`` The server attribute of the context to be deleted ============================ ====================================================================================== **Example**: .. code-block:: text # robin client delete-context centos-60-214 Context centos-60-214 deleted Managing Unused Images ======================= Unused docker images tend to bloat and consume system storage. Whilst they can be deleted, manually locating and removing them becomes cumbersome. Robin facilitates the deletion of unused images (which are not in use by any containers) on all hosts (or a given subset) within the cluster. In addition, users can schedule a job to prune unnecessary images so as to mimic garbage collection for these images. The following commands are described in this section: =============================== ================================================================================= ``robin host pruneimage`` Prune unused images from hosts within the cluster =============================== ================================================================================= ====================== Pruning Images ====================== .. tabs:: .. tab:: CLI In order to remove unused images on a host, issue the following command: .. code-block:: text # robin host pruneimage [] --skip-images-file --all =========================================== ====================================================================================== ``hostnames`` Comma seperated list of host FQDNs ``--skip-images-file `` Path to file containing a list of images that should not be pruned. Each image should be specified on a seperate line and in the following format: : ``--all`` Prune unused images from all hosts. Should be specified if no hostname is given =========================================== ====================================================================================== **Example**: .. code-block:: text # robin host pruneimage vnode36.robinsystems.com --wait Job: 226 Name: HostPruneImagesMulti State: PROCESSED Error: 0 Job: 226 Name: HostPruneImagesMulti State: COMPLETED Error: 0 .. tab:: API Removes unused images from a specified host. **End Point:** /api/v3/robin_server/hosts/ **Method:** PUT **URL Parameters:** None **Data Parameters:** - ``action: pruneimage`` - This mandatory field within the payload specifies that the image prune operation should be performed. - ``skip_images: `` - Utilizing this parameter within the payload, by specifying a list of images in the format ``:``, results in the given images not being removed even if they are unused at the moment. **Port:** RCM Port (default value is 29442) **Headers:** - ``Authorization: `` : Authorization token to identify which user is sending the request. The token can be acquired from the login API. **Success Response Code:** 202 **Error Response Code:** 500 (Internal Server Error), 404 (Not Found Error), 401 (Unauthorized Error), 400 (Invalid API Usage Error) **Example Response:** .. raw:: html
Output .. code-block:: text { "jobid":1039 } .. raw:: html
========================== Enabling Pruning Schedule ========================== .. tabs:: .. tab:: CLI In order to enable a schedule that removes all unused images via a CRON string, issue the following command: .. code-block:: text # robin config update server image_prune_cron =========================================== ====================================================================================== ``cron_string`` CRON string representing the time at which the schedule shouild run =========================================== ====================================================================================== .. Note:: In order to set the schedule via a CRON string, it has to be enabled first via the following command: ``robin config update server enable_image_prune_schedule true`` **Example**: .. code-block:: text # robin config update server enable_image_prune_schedule true The 'server' attribute 'enable_image_prune_schedule' has been updated # robin config update server image_prune_cron "0 2 * * *" The 'server' attribute 'image_prune_cron' has been updated ========================== Disabling Pruning Schedule ========================== .. tabs:: .. tab:: CLI In order to disable the schedule that removes all unused images, issue the following command: .. code-block:: text # robin config update server enable_image_prune_schedule false **Example**: .. code-block:: text # robin config update server enable_image_prune_schedule false The 'server' attribute 'enable_image_prune_schedule' has been updated